ISOFLEX SUPER LDS 18 is a low-noise, high-speed grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. It protects against corrosion and is resistant to ageing and oxidation.
ISOFLEX SUPER LDS 18
- ISOFLEX SUPER LDS 18 is suitable for plain and rolling bearings, small, miniature and precision bearings, for precision mechanical and optical equipment and low-temperature applications.
- It can also be used as an anti-corrosion and anti-wear lubricant in electrical contacts.
- Properly applied, ISOFLEX SUPER LDS 18 protects against corrosion, improves sliding properties and reduces wear, e.g. in sliding contacts and potentiometers.
- Low running torque enables energy savings, particularly at low temperatures.
- Smooth-running grease for high performance.
- Long service life due to good corrosion protection and ageing stability, hence cost savings possible.
- Low heating-up of bearings due to low lubricant friction leading to longer service lives.
| Characteristics | ISOFLEX SUPER LDS 18 |
| Article number | 004024 |
| Composition, thickener | lithium soap |
| Composition, type of oil | ester oil , mineral oil |
| Colour space | yellow |
| Texture | homogeneous , short fibrous |
| Service temperature, lower limit | -50 °C |
| Service temperature, upper limit | 120 °C |
| Density, Klüber method: PN 024, 20°C | approx. 0.9 g/cm³ |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit | 265 0.1 mm |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit | 295 0.1 mm |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit | 2000 mPas |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit | 3400 mPas |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C | approx. 3.5 mm²/s |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 15.5 mm²/s |
| SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h | 0 corrosion degree |
| Flow pressure, DIN 51805-2, -50°C | ≤ 1400 mbar |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 190 °C |
| Speed factor (n x dm) | 1000000 mm/min |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx | 36 months |
Copyright © 2021 Petrotech Industrial and Mineral Oils - Konya | All rights reserved.
