SOFLEX TOPAS AK 50 consists of synthetic hydrocarbon oil and aluminium complex soap. It protects against corrosion and is resistant to oxidation and ageing. In addition, it has good wetting properties and low internal lubricant friction.
ISOFLEX TOPAS AK 50
- ISOFLEX TOPAS AK 50 is suitable for the lubrication of plain and rolling bearings operating at high and/or low temperatures. It can also be used in small gears and plastic/steel as well as plastic/plastic components. It is compatible with many thermoplastics.
- The lubricant is applied by brush or conventional metering systems. Owing to the different compositions of elastomers and plastic materials, compatibility tests are indispensable before series application.
- Lubricant for plastic components
- High-speed grease
- Good corrosion protection
- Resistant to oxidation and ageing
- Good surface wetting
| Characteristics | ISOFLEX TOPAS AK 50 |
| Article number | 004151 |
| Composition, thickener | aluminium complex soap |
| Composition, type of oil | synthetic hydrocarbon oil |
| Colour space | yellow |
| Texture | homogeneous , short fibrous |
| Service temperature, lower limit | -50 °C |
| Service temperature, upper limit | 120 °C |
| Density, Klüber method: PN 024, 20°C | approx. 0.87 g/cm³ |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit | 355 0.1 mm |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit | 385 0.1 mm |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit | 1200 mPas |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit | 1200 mPas |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C | 2000 mPas |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C | approx. 5.9 mm²/s |
|
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C |
approx. 30 mm²/s |
| SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h | ≤ 1 corrosion degree |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 200 °C |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 24 months |
Copyright © 2021 Petrotech Industrial and Mineral Oils - Konya | All rights reserved.
