ISOFLEX TOPAS L 32 N

Special low-temperature greases for wide field of applications.

As a manufacturer of automotive components, you are dealing with customers asking for reliable component function over a long serviceN life and in particular at low temperatures. By selecting an appropriate lubricant, you can meet all these ever more demanding requirements in the market. With ISOFLEX TOPAS L 32 and L 32 N, we offer you two lubricants that have both been designed for particularly low temperatures.

ISOFLEX TOPAS L 32 and L 32 N are based on a synthetic hydrocarbon oil and a lithium soap. The corrosion protection properties of these oils are good as is their ageing and oxidation stability.

The additional UV indicator contained in ISOFLEX TOPAS L 32 N enables reliable quality control upon application, even with minimum quantities.

This will increase the reliability of your production process.

You may use ISOFLEX TOPAS L 32 and L 32 N especially for the lubrication of small gears as can be found in electric actuators in vehicles (e.g. in window lifters, sun roofs, seat adjustments, headlights and ventilation flaps).

ISOFLEX TOPAS L 32 and L 32 N have been successfully used in the automotive industry for many years and are specified and approved by most automobile makers and their suppliers worldwide.

Further fields of application are:

Slideways, bowden wires, door locks
Rolling bearings in small motors, fans, pumps
Gear flanks in plastic/plastic gearboxes (e.g. POM, PA or
PBT) and for plastic/steel material pairings

For applications in the car interior (e.g. ventilation flaps) with special requirements regarding neutrality in odour acc. to VDA 270, Klübersynth LMI 44-42 may be used as an alternative.

You can apply ISOFLEX TOPAS L 32 and L 32 N by spatula, brush, grease gun or grease cartridge.

Low breakaway torque even at very low temperatures in small gears and actuators
Reduced wear due to reliable lubricating film over a wide service temperature range enabling longer component life.
For-life lubrication enabled by strong corrosion protection, oxidation and ageing resistance

Characteristics	SOFLEX TOPAS L 32	SOFLEX TOPAS L 32
Article number	004337	004227
Composition, thickener	lithium soap	lithium soap
Composition, type of oil	synthetic hydrocarbon oil s	synthetic hydrocarbon oil s
Colour space	beige	beige
Texture	homogeneous , short fibrous	homogeneous , short fibrous
Service temperature, lower limit	-60 °C	-60 °C
Service temperature, upper limit	130 °C	130 °C
Density, Klüber method: PN 024, 20°C	approx 0.84 g/cm³	approx 0.86 g/cm³
NLGI grade, DIN 51818	2	2
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	265 0.1 mm	265 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	295 0.1 mm	295 0.1 mm
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit	2000 mPas	2000 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit	4500 mPas	5000 mPas
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx 3.8 mm²/s	approx 3.8 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx 17 mm²/s	approx 17 mm²/s
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	≤ 1 corrosion degree	≤ 1 corrosion degree
Flow pressure, DIN 51805-2, -35°C	≤ 450 mbar	≤ 450 mbar
Dropping point, DIN ISO 2176 / IP 396	≥ 185 °C	≥ 185 °C
Speed factor (n x dm)	1000000 mm/min	1000000 mm/min
Water resistance, DIN 51807-1, 3 h, 90°C	≤ 1 - 90 rating	≤ 1 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months	36 months

isoflex-topas-l-32-n.pdf isoflex-topas-l-32-n-en.pdf

Products

Home-Page | Products | ISOFLEX TOPAS L 32 N

ISOFLEX TOPAS L 32 N