KLUBERPLEX BE 31

Lubricating greases for extreme requirements.

Klüberplex BE 31-102…-222…-502 are lubricating greases based on mineral oil and special calcium soap. They offer high resistance to mechano-dynamical loads and good adhesion properties. Klüberplex BE 31-102…-222…-502 are highly resistant to media, water and water vapour. We recommend testing compatibility prior to series application.

Klüberplex BE 31-102…-222…-502 are lubricating greases for e.g. rolling and plain bearings, pivoting bearings, small gears. They can also be used as sealing and lubricating greases for labyrinth seals and industrial valves and fittings. These greases are used for the long-term and lifetime lubrication of e.g. rolling bearings in automotive components (water pump bearings, universal joint bushings), wet processing machines in the textile industry (festoon steamers, washing machines), spinning machines (top and bottom rollers of drafting frames), conveyors (load rollers in wet areas), paper machines (especially in wet sections), agricultural and construction machinery, machines in the food processing industry, as well as rolling bearings in electric motors, fans and pumps.

Longer component life

due to reduced wear and good pressure absorption capacity

Reduced maintenance due to

good sealing effect and resistance to water and other media
long relubrication intervals and good ageing and oxidation stability

Characteristics	Klüberplex BE 31-102	Klüberplex BE 31-222	Klüberplex BE 31-502
Article number	017135	017132	017126
Colour space	brown	brown	brown
Texture	fibrous , homogeneous	fibrous , homogeneous	fibrous , homogeneous
Service temperature, lower limit	-15 °C	-10 °C	-10 °C
Service temperature, upper limit	120 °C	140 °C	140 °C
Density, Klüber method: PN 024, 20°C	approx. 0.96 g/cm³	approx. 0.96 g/cm³	approx. 0.96 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	265 0.1 mm	245 0.1 mm	245 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	295 0.1 mm	275 0.1 mm	275 0.1 mm
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 12 mm²/s	approx. 19 mm²/s	approx. 31 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 100 mm²/s	approx. 220 mm²/s	approx. 500 mm²/s
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	-	≤ 1 corrosion degree	≤ 1 corrosion degree
Flow pressure, DIN 51805-2, -10°C	-	≤ 1400 mbar	≤ 1400 mbar
Flow pressure, DIN 51805-2, -15°C	≤ 1400 mbar	-	-
Dropping point, DIN ISO 2176 / IP 396	≥ 190 °C	≥ 190 °C	≥ 190 °C
Speed factor (n x dm)	1000000 mm/min	500000 mm/min	approx 200000 mm/min
Water resistance, DIN 51807-1, 3 h, 90°C	≤ 1 - 90 rating	≤ 1 - 90 rating	≤ 1 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months	36 months	36 months

kluberplex-be-31.pdf kluberplex-be-31-en.pdf

Products

Home-Page | Products | KLUBERPLEX BE 31

KLUBERPLEX BE 31