Operators of applications subject to vibration at rest, e.g. wheel bearings of motor vehicles, expect long lubricating grease life and good wear protection. Premature component failure can only be prevented by an appropriate lubricant offering good wear protection and oil release properties. Klüberplex BEM 34-132 has been tested and proven in such applications for many years.
Klüberplex BEM 34-132 is used for ball bearings and linear guides, ball screws subject to oscillating motion, high loads and vibration.
These may typically be found in:
Klüberplex BEM 34-132 is also suitable as sealing grease for rolling bearings due to its excellent media resistance. The product has good resistance to water and steam and presents as well good performance in presence of dilute alkali and acid solutions.
| Characteristics | Klüberplex BEM 34-132 |
| Article number | 017141 |
| Composition, thickener | calcium complex soap |
| Composition, type of oil | mineral oil , synthetic hydrocarbon oil |
| Colour space | beige |
| Service temperature, lower limit | -35 °C |
| Service temperature, upper limit | 140 °C |
| Lubricating greases - K, DIN 51825@DIN 51502 | KPHC2N-30L |
| Density, Klüber method: PN 024, 20°C | approx. 0.9 g/cm³ |
| NLGI grade, DIN 51818 | 2 |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit | 265 0.1 mm |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit | 295 0.1 mm |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C | approx. 15.5 mm²/s |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 130 mm²/s |
| SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h | ≤ 1 corrosion degree |
| Flow pressure, DIN 51805-2, -30°C | ≤ 1600 mbar |
| Low temperature torque, IP 186, -35°C, running torque | ≤ 100 mNm |
| Low temperature torque, IP 186, -35°C, starting torque | ≤ 1000 mNm |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 220 °C |
| FAG FE9 rolling bearing test, DIN 51821-2, 1500 / 6000-140, service life F50 | ≥ 100 h |
| Speed factor (n x dm) | approx. 1000000 mm/min |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 36 months |
Copyright © 2021 Petrotech Industrial and Mineral Oils - Konya | All rights reserved.
