KLUBERSYNTH H 46-702

Synthetic special grease for torsion dampers and vibration dampers in vehicle drive trains.

As a manufacturer of torsion dampers and/or vibration dampers you are likely to be facing the challenge of providing lifetime lubrication and reliable operation in combination with optimum damping and reduced wear.

The product Klübersynth H 46-702 from Klüber Lubrication offers the ideal solution for such applications. Klübersynth H 46-702 consists of fully synthetic base oils and a special lithium soap.

Klübersynth H 46-702 shows good compatibility with frequently used plastic parts and seals.

As we have cooperated with international OEM partners for many years, we have sound and comprehensive expertise to support you with your application

For-life lubricated torsion dampers, e.g. two-mass flywheels in passenger cars or trucks. Klübersynth H 46-702 has been tested on series-produced parts under conditions resembling those in the field as well as in the actual applications exposed to high-frequency vibration and high centrifugal forces. Klübersynth H 46-702 can be applied to the friction point by spatula, grease gun and automatic lubricating systems.
The colour of products manufactured using chemical processes may vary due to chemical/physical effects such as UV radiation. However, none of these colour variations is an indicator of altered product quality.

Special grease tried and tested in series application
Remains at the friction point even when exposed to high centrifugal forces
Low oil separation
Noise-damping during engine start, vehicle start and when operating under load

Characteristics	Klübersynth H 46-702
Article number	012270
Composition, thickener	lithium complex soap
Composition, type of oil	polyalkylenglycol
Colour space	beige
Texture	fibrous , homogeneous
Service temperature, lower limit	-35 °C
Service temperature, upper limit	160 °C
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	250 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	280 0.1 mm
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 110 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 700 mm²/s
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	≤ 1 corrosion degree
Oil separation, ASTM D6184, based on standard, 30 h, 150°C	≤ 3 by weight %
Flow pressure, DIN 51805-2, -35°C	≤ 1400 mba
Dropping point, DIN ISO 2176 / IP 396	≥ 250 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months

klubersynth-h-46-702.pdf klubersynth-h-46-702-en.pdf

Products

Home-Page | Products | KLUBERSYNTH H 46-702

KLUBERSYNTH H 46-702