KLUBERSYNTH HB 72-102

Klübersynth HB 72-102 is a synthetic lubricating grease covering the very wide temperature range needed, for example, in the automotive industry. The product constituents – ester oil, polyurea thickener and selected additives – ensure a consistently low oil release level at the different temperatures over a long time. Good resistance to hot and cold water and efficient corrosion protection contribute to a reliable operation of the bearing. Tests with some sealing materials like FPM, ACM and NBR confirm good compatibility with elastomers.

Klübersynth HB 72-102 has been especially designed and approved for the lifetime lubrication of clutch release bearings in the automotive industry. The grease also meets additional requirements n terms of increased corrosion protection. Owing to its performance, Klübersynth HB 72-102 can also be used for other applications, e.g. ball bearings in belt tensioning rollers, electric motors etc.
The lubricant is applied by means of a spatula, brush, grease gun or grease cartridge. Please run your own tests if you would like to use automatic lubrication systems or contact us for more information.

Tried-and-tested grease concept based on polyurea and ester oil
High-temperature grease for the lifetime lubrication of bearings in the automotive industry
Reduced maintenance costs due to high reliability
Proven effective for many years in clutch release bearings, therefore minimized risk in this application

Characteristics	Klübersynth HB 72-102
Article number	094068
Composition, thickener	polyurea
Composition, type of oil	ester oil
Colour space	beige
Service temperature, lower limit	-40 °C
Service temperature, upper limit	180 °C
Density, Klüber method: PN 024, 20°C	approx. 0.97 g/cm³
NLGI grade, DIN 51818	2
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 14 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 95 mm²/s
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	≤ 1 corrosion degree
Oil separation, ASTM D6184, based on standard, 30 h, 150°C	≤ 4 % by weight
Low temperature torque, IP 186, -40°C, running torque	≤ 200 mNm
Low temperature torque, IP 186, -40°C, starting torque	≤ 1000 mNm
Dropping point, DIN ISO 2176 / IP 396	≥ 240 °C
FAG FE9 rolling bearing test, DIN 51821-2, 1500 / 6000-180, service life F50	≥ 100 h
Speed factor (n x dm)	approx. 700000 mm/min
Water resistance, DIN 51807-1, 3 h, 90°C	0 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months

klubersynth-hb-72-102.pdf

Products

Home-Page | Products | KLUBERSYNTH HB 72-102

KLUBERSYNTH HB 72-102