Products

Home-Page | Products | KLUBERSYNTH HLR 46-371

KLUBERSYNTH HLR 46-371

Klübersynth HLR 46-371 is an adhesive, pliant and high-temperature resistant special lubricating grease. Due to the product composition (base oil: polyalkylene glycol oil; thickener: special lithium soap) it is possible to use it in context with many elastomers which are sensitive to mineral oil (particularly EPDM) and plastics.

Outstanding performance data:

  • very wide service temperature range
  • good corrosion protection
  • good water resistance
  • excellent oxidation stability

Elastomer/metal or plastic/metal sliding material combinations, eg in car components

  • brake boosters
  • drum brakes
  • disc brakes
  • main brake cylinders
  • ABS
  • small gears (metal/plastic)
  • rolling bearings with EPDM sealing disks
  • radial shaft seals with EPDM elastomer

Compatibility with elastomers and plastics: The following elastomers were tested 168 h for compatibility with Klübersynth HLR 46-371 at 100 and 150°C. We recommend checking the compatibility of the lubricating grease and the contacting material, especially prior to series applications (our test results were obtained with samples and are not a substitute for your own testing).

  • Lubricating and assembly paste
  • Service temperature range – 40 / 150 °C
  • For elastomer/metal sliding material combinations
Characteristics Klübersynth HLR 46-371
Article number 012191
Composition, thickener lithium complex soap
Composition, type of oil polyalkylenglycol
Colour space red
Texture fibrous , homogeneous
Service temperature, lower limit -40 °C
Service temperature, upper limit 150 °C
Density, Klüber method: PN 024, 20°C approx. 0.97 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 280 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 310 0.1 mm
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 57.5 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 363 mm²/s
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree
Flow pressure, DIN 51805-2, -40°C ≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396 ≥ 220 °C
Speed factor (n x dm) approx. 300000 mm/min
Water resistance, DIN 51807-1, 3 h, 90°C ≤ 1 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months

 

Konya Web Tasarım, Tuyan Tasarım ve Reklam Ajansı