KLUBERSYNTH HM 2-220

High-temperature oil for the glass industry.

Klübersynth HM 2-220 is a synthetic high-temperature oil especially developed for the glass industry. Besides the normal temperature range, Klübersynth HM 2-220 is especially suitable for the hightemperature range because its evaporation loss at elevated temperatures is very low. The product has good penetration properties and forms a lubricant film very quickly. Klübersynth HM 2- 220 is free from solids, which helps to avoid sedimentation.

Klübersynth HM 2-220 is suitable for all IS machines. It can be used for all friction points in the normal and high-temperature sections which are lubricated through a centralized lubrication system. In addition, Klübersynth HM 2-220 is suitable for conveyor and cross belt chains which are lubricated by means of oil spray systems, drip oilers, centralized lubrication system, or by hand (oil feeder/brush).
Keeping the friction point always covered with Klübersynth HM 2- 220 ensures good wear protection and prevents impeded operation and residues. To achieve optimum efficiency it is important not to mix Klübersynth HM 2-220 with other oils

Lower oil costs due to lower consumption
Lower waste water disposal costs due to excellent water separation ability
Much less machine contamination, hence lower cleaning costs
Smooth machine operation due to good pumpability and precise metering by centralised lubricating systems
Higher machine efficiency due to uninterrupted operation with higher output
Higher machine reliability due to less residue formation
Less machine wear also at high temperatures
No starting-up problems, restart of cooled-down machine 20% to 30% faster thanks to good temperature-viscosity behaviour
Changeover to Klübersynth HM 2-220 easy as miscible with mineral oil

Characteristics	Klübersynth HM 2-220
Article number	002115
Composition, type of oil	ester oil , synthetic hydrocarbon oil
Appearance	clear
Colour space	yellow
Service temperature, upper limit	250 °C
Density, DIN 51757, 20°C	approx. 0.92 g/cm³
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 25 mm²/s
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 220 mm²/s
Four-ball tester, welding load, DIN 51350-2	≥ 2200 N
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months

klubersynth-hm-2-220.pdf klubersynth-hm-2-220-en.pdf

Products

Home-Page | Products | KLUBERSYNTH HM 2-220

KLUBERSYNTH HM 2-220