PETAMO GHY 133 N

Long-term and high-temperature grease for rolling bearings.

PETAMO GHY 133 N is a high-performance lubricating grease for rolling bearings subject to high temperatures. It has the following advantages:

Resistance to high temperatures
High resistance to oxidation
Efficient wear protection even at high temperatures
Good corrosion protection
Good water resistance

The high performance level of PETAMO GHY 133 N is achieved by means of selected product constituents such as polyurea thickener, mineral oil, synthetic hydrocarbon oil and additives, as well as the production technology.

PETAMO GHY 133 N is suitable for long-term and lifetime lubrication in a variety of applications including:

Rolling bearings in

electric motors
fan heaters
drying installations
textile machines
paper machines

Automotive components, e.g

belt tensioning rollers (rotating outer ring)
couplings
water pumps
fans
wheel bearings

In component tests PETAMO GHY 133 N achieves excellent results in terms of service life.

In water pump bearings PETAMO GHY 133 N offers excellent compatibility with coolants containing glycol.

PETAMO GHY 133 N can be applied to rolling bearings by means of appropriate automatic or conventional lubrication systems.

PETAMO GHY 133 N has also been tested and approved for contact-free minimum-quantity greasing starting from 0.1 mg by electro-pneumatic jet valves.

As a rule the grease should be applied in a clean environment.

Reduced maintenance due to lifetime lubrication
Wide service temperature range allows a variety of applications
Reliable operation and long service life due to excellent protection against wear and corrosion, especially in water pump bearings and clutch release bearings

Characteristics	PETAMO GHY 133 N
Article number	094061
Composition, thickener	polyurea
Composition, type of oil	mineral oil , synthetic hydrocarbon oil
Colour space	brown
Service temperature, lower limit	-40 °C
Service temperature, upper limit	160 °C
Lubricating greases - K, DIN 51825@DIN 51502	KHC2P-30
Density, Klüber method: PN 024, 20°C	approx. 0.9 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	265 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	295 0.1 mm
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 18 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 165 mm²/s
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	≤ 1 corrosion degree
Flow pressure, DIN 51805-2, -30°C	≤ 1400 mbar
Low temperature torque, IP 186, based on standard, equipment: IP 186 / LT3, -40°C, starting torque	≤ 1000 mNm, ≤ 300 mNm
Dropping point, DIN ISO 2176 / IP 396	≥ 250 °C
FAG FE9 rolling bearing test, DIN 51821-2, 1500 / 6000-160, service life F50	≥ 100 h
Speed factor (n x dm)	approx. 500000 mm/min
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months

kluber-petamo-ghy-133-n.pdf kluber-petamo-ghy-133-n-en.pdf

Products

Home-Page | Products | PETAMO GHY 133 N

PETAMO GHY 133 N