BARRIERTA I EL FLUID

BARRIERTA is Europe's oldest high-quality brand of hightemperature lubricants based on perfluorinated polyether oil (PFPE). The name of BARRIERTA is widely regarded as synonymous with long-term stability and thermal resistance. BARRIERTA products are among the most widely used PFPE lubricants today.

BARRIERTA Fluids are based on highly refined PFPE oils. Thanks to their excellent thermal stability and availability in four different viscosity grades, BARRIERTA Fluids have proven successful for many years in a large variety of applications.

BARRIERTA I SFLUID is NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of BARRIERTA I SFLUID can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

BARRIERTA Fluids attain long service lives in rolling bearings, plain bearings, sintered metal bearings and guides subject to extreme temperatures or aggressive chemicals.
Owing to their low vapor pressures, and depending on the viscosity grade, BARRIERTA Fluids are also suitable for high-vacuum applications.
Electrical contacts BARRIERTA Fluids offer long-term protection against wear on electrical contacts, especially those with gold surfaces. There are no known decomposition products that would have an insulating effect on the contacts.
Chains BARRIERTA I S Fluid is suitable for the lubrication of hightemperature chains and even meets stringent hygiene requirements. BARRIERTA IS Fluid is non-toxic and non-odorous.
Plastic-plastic friction points BARRIERTA Fluids are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber). A negative impact on materials is not to be expected. Nevertheless, we recommend testing the lubricant's compatibility with the materials in question prior to series application.
We recommend cleaning all parts to operate in contact with the lubricant with white spirit 180/210 and/or Klüberalfa XZ 3-1. Upon cleaning, apply clean compressed air or hot air to remove any residues. The friction point should be clean and bright (i.e. free from oil, grease or perspiration) and free from contamination particles to ensure optimum function.

Extended service life possible due to

excellent thermal stability
low evaporation rates

Wide application range due to

availability in four viscosity grades
compatibility with a wide range of plastics and elastomer materials

Characteristics	BARRIERTA I S FLUID	BARRIERTA I MI FLUID	BARRIERTA I EL FLUID	BARRIERTA 0 FLUID
Article number	090004	090003	090002	090001
Composition, type of oil	PFPE	PFPE	PFPE	PFPE
Appearance	clear	clear	clear	clear
Colour space	colourless	colourless	colourless	colourless
Service temperature, lower limit	-25 °C	-25 °C	-40 °C	-60 °C
Service temperature, upper limit	260 °C	220 °C	180 °C	100 °C
NSF H1 registration number	136762	-	-	-
Density, DIN 51757, 20°C	approx. 1.91 g/cm³	approx. 1.9 g/cm³	approx. 1.9 g/cm³	approx. 1.88 g/cm³
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 43 mm²/s	approx. 22 mm²/s	approx. 12 mm²/s	approx. 4.5 mm²/s
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 425 mm²/s	approx. 205 mm²/s	approx. 98 mm²/s	approx. 28 mm²/s
Viscosity index, DIN ISO 2909	≥ 120	≥ 120	≥ 100	≥ 75
Pour point, DIN ISO 3016	≤ -30 °C	≤ -30 °C	≤ -45 °C	≤ -60 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	60 months	60 months	60 months	60 months

kluber-barrierta-i-el-fluid.pdf

Products

Home-Page | Products | BARRIERTA I EL FLUID

BARRIERTA I EL FLUID