GRAFLOSCON B-SG 00 ULTRA

GRAFLOSCON B-SG 00 ULTRA is a sprayable running-in lubricant with a mineral base oil. It contains aluminium stearate as a thickener and solid lubricant particles of fine graphite. The lubricant is free from bitumen, heavy metals, solvents and raw materials containing chlorine, and allows to subject the friction points to well-defined wear. GRAFLOSCON B-SG 00 ULTRA reduces surface roughness and improves the tooth flank quality which makes it also suitable for corrective lubrication if tooth flanks are damaged.

GRAFLOSCON B-SG 00 ULTRA was especially developed for specific running-in of open gears in rotary kilns, tube mills, and line blenders used in the cement, lime, gypsum, mining and chemical industries.
GRAFLOSCON B-SG 00 ULTRA is usually applied continuously through automatic spray systems.
It can also be applied by brush or the Klübermatic® LB manual spray equipment.
The lubricant quantities to be applied depend on the individual operating conditions and are indicated in the corresponding consumption chart. Do not expose to direct sunlight.

GRAFLOSCON B-SG 00 ULTRA reduces surface roughness and improves tooth flank quality thus contributing to a longer service life of drives and reduced maintenance costs.

Characteristics	GRAFLOSCON B-SG 00 ULTRA
Article number	03907
Solid lubricants	approx. 12 % by weight
Colour space	black
Texture	homogeneous , long fibrous
Application, in automatic spray systems	-15 - 90 °C
Functional lubricant film	approx. -30 °C
Thermal stability of the lubricating film, depends on the relubrication	approx. 200 °C
Density, Klüber method: PN 024, 20°C	approx. 1.00 g/cm³
NLGI grade, DIN 51818	00
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 500 mm²/s
Dropping point, DIN ISO 2176 / IP 396	> 90 °C
Four-ball tester, welding load, DIN 51350-4	≥ 6500 N
FZG scuffing test, DIN ISO 14635-3, based on standard, A / 2.8 / 50, change of weight	approx. 1.4 mg/kWh
FZG scuffing test, DIN ISO 14635-3, based on standard, A / 2.8 / 50, failure load stage	> 12
Water resistance, DIN 51807-1, 3 h, 40°C	0 - 40 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months

kluber-grafloscon-b-sg-00-ultra.pdf

Products

Home-Page | Products | GRAFLOSCON B-SG 00 ULTRA

GRAFLOSCON B-SG 00 ULTRA