Products

Home-Page | Products | KLUBERALFA MR 3

KLUBERALFA MR 3

Universal sliding fluid for seals, guideways and plastic friction points.

Car manufacturers are confronted with the need to prevent creaking noises (NVH requirements), in particular when a new vehicle model is being launched.

The sliding fluids Klüberalfa MR 3 based on PFPE are resistant to evaporation and were specifically developed for NVH requirements and lifetime lubrication. They offer a less expensive alternative to other noise-reducing products such as films or adhesive tapes.

Klüberalfa MR 3 products are highly compatible with most elastomers and plastics. Due to their being visually neutral, they can be used for applications in car interiors as well as in other industrial sectors.

Klüberalfa MR 3 is available in three different viscosities and supplied in a pump spray dispenser that does not release greenhouse gases. It is easy to use in economically small quantities and does not give off combustible or flammable solvent vapours. The product forms a homogeneous lubricating film.

  • Due to its good compatibility, Klüberalfa MR 3 may be used in combination with most materials, e.g. leather, textile or plastic, in car interiors or on the car body.
  • Klüberalfa MR 3 is compatible with most thermoplastics or thermosetting plastics used, for example, in dashboards, seat and sunroof sliding rails, arm rests, seat adjustment mechanisms, door and sunroof seals.
  • Perfluorinated polyether oils are generally regarded as neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Nevertheless we recommend testing compatibility with the material to be used, especially prior to series application.
  • For optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 followed by Klüberalfa XZ 3-1 before using Klüberalfa MR 3 for the first time. Then blow the surfaces with clean, dry compressed air or hot air to remove white spirit residues.
  • For initial lubrication, the friction points must be clean and bright, i.e. free from oil, grease, perspiration and contamination.
  • Reduced noise and optimised friction
  • Can be combined with numerous material combinations
  • Easy and reliable application
Ürün Bilgisi Klüberalfa MR 3 Klüberalfa MR 3-500 Klüberalfa MR 3- 800
Artikel numarası 090118 090195 090194
Bileşim, çözücü florlu solvent florlu solvent florlu solvent
Bileşim, yağ tipi PFPE PFPE PFPE
Görünüm berrak berrak berrak
çalışma sıcaklığı, üst limit  180 °C 200 °C 250 °C
Yoğunluk, Klüber yöntemi: PN 024, 20°C yaklaşık 1.53 g/cm³ yaklaşık 1.55 g/cm³ yaklaşık 1.61 g/cm³
Baz yağın kinematik viskozitesi, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C yaklaşık 9 mm²/s yaklaşık 38 mm²/s yaklaşık 80 mm²/s
Baz yağın kinematik viskozitesi, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C yaklaşık 95 mm²/s yaklaşık 395 mm²/s yaklaşık 800 mm²/s
Akma noktası, DIN ISO 3016 ≤ -45 °C ≤ -30 °C  -
Baz yağın akma noktası, DIN ISO 3016, DIN ISO 3016  -  - ≤ -15 °C
Üretim tarihinden itibaren minimum raf ömrü – açılmamış orijinal ambalajında, serin ve kuru yerde, yaklaşık 24 ay 24 ay 36 ay

 

Konya Web Tasarım, Tuyan Tasarım ve Reklam Ajansı