Products

Home-Page | Products | KLUBERBIO LG 39-701 N

KLUBERBIO LG 39-701 N

Are you a manufacturer or operator of open gear drive, jack lift systems or other onboard equipment that frequently comes into contact with seawater? In this case, you may be interested in purchasing an environmentally friendly, high-performance operating oil.

Our Klüberbio LG 39-701 N is a high-performance grease with a new base oil and additive package. It combines very good eco-friendliness with high load-carrying capacity, good anti-wear and anti-corrosion effect and excellent adhesion to surfaces.

The high viscosity base oil of Klüberbio LG 39-701 N comes from 100% renewable resources.

Klüberbio BM 32-142 meets the Environmentally Aware Lubricant (EAL) requirements defined by the US Environmental Protection Agency for the 2013 VGP (Vessel general permits) in terms of biodegradability, toxicity and bioaccumulation.

Due to the excellent low-temperature behavior of the oil, it can be pumped in central lubrication systems down to -30 °C and sprayed even below 0 °C. These positive product characteristics allow you to use the oil over a wider temperature range than is common with mineral oil-based greases with the same base oil viscosity.

Klüberbio LG 39-701 N provides a reduction in oil consumption of more than 50% in jack-up lifting systems if spray application is used. This reduces operating costs and contributes to the protection of the environment.

  • Klüberbio LG 39-701 N was developed for the lubrication of open gear drives and rack and pinion drives as well as steering stocks and high surface pressure sliding surfaces.
  • Klüberbio LG 39-701 N has been developed for the lubrication of open gears, rack and pinion gears as well as steering rods, as well as sliding surfaces with high surface pressure. The product can be used in marine applications requiring a good anticorrosive effect, high load carrying capacity and ecological compatibility. For example. Open rail crane drives in AHTS marine vessels or steering systems, rack and pinion gears in jack lifting systems, slow moving plain bearings, stern roller bearings are some of the applications where the product is used.
  • Klüberbio LG 39-700 N transfer pinion lubrication can be applied continuously with spray systems, automatic greasing systems and brush.
  • The amount of lubricant required and the highest operating temperature range depends on the different operating conditions of each application. Our sales engineers will be happy to advise you.
  • Complies with the requirements for environmentally friendly lubricants (according to VGP 2013 Annex A)
  • Lower environmental impact in case of leakage. The base oil consists of renewable raw materials and is completely biodegradable.
  • Thanks to its good low temperature behavior, it enables open gears to operate in cold conditions.
  • The additives it contains extend component life and reduce wear.
  • When applied with spray systems, it provides cost reduction due to low consumption.
  • Registered in Denmark, Norway, the Netherlands and the United Kingdom, meets OSPAR compliance requirements.
Ürün Bilgisi Klüberbio LG 39-701 N
Artikel numarası 009050
yapı, kalınlaştırıcı kalsiyum sabun
Bileşim, yağ tipi  doğal ester
Renk bej
Yapı homojen
Vessel General Permit geçti
Biyolojik olarak parçalanabilirlik, OECD 301 F, içinde, 28 days ≥ 60 %
Yoğunluk, Klüber yöntemi: PN 024, 20°C yaklaşık 0.94 g/cm³
Çalışılmış penetrasyon, DIN ISO 2137 / ASTM D217, 25°C, alt limit 300 0.1 mm
Çalışılmış penetrasyon, DIN ISO 2137 / ASTM D217, 25°C, üst limit  330 0.1 mm
Baz yağın kinematik viskozitesi, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C yaklaşık 93 mm²/s
Baz yağın kinematik viskozitesi, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C yaklaşık 680 mm²/s
Greslerin, DIN 51805-2, -30°C ≤ 1400 mbar
Akma noktası, DIN ISO 2176 / IP 396 ≥ 100 °C
Dört bilya EP testi, kaynama yükü, DIN 51350-4 ≥ 5500 N
FZG aşındırma testi, DIN ISO 14635-3, based on standard, A / 2.8 / 50, başarısız yük kademesi > 12
Üretim tarihinden itibaren minimum raf ömrü – açılmamış orijinal ambalajında, serin ve kuru yerde, yaklaşık 24 ay

 

Konya Web Tasarım, Tuyan Tasarım ve Reklam Ajansı