KLUBERPLUS S 01-004

Aqueous graphite suspension.

Klüberplus S 01-004 is a stable, aqueous graphite suspension used for applications at very high temperatures. It is free from solvents and thus prevents environmental contamination by solvent evaporation. In an undiluted condition Klüberplus S 01-004 is characterized by a very good wetting capacity, good corrosion protection and high stability.

Klüberplus S 01-004 is suitable for the lubrication of transport chains in burning and annealing furnaces (e.g. tube annealing furnaces) operating at extremely high temperatures. It is also suitable for drive and control chains in melting furnaces used in the metalworking industry and for other chains subject to high thermal loads, such as plate carrier chains in baking ovens. Klüberplus S 01-004 can also be used as a release agent for the diecasting of copper alloy materials.
Klüberplus S 01-004 is a ready-to-use product that can be applied by brush, oil metering can or automatic spray equipment. For chain relubrication we recommend application to a cold chain or to a chain heated to approx. 60 °C. If required, dilution with water is possible. However, the lubricity, wettability, corrosion protection and stability of Klüberplus S 01-004 will decrease to the same extent as the dilution ratio increases. For chain lubrication we recommend dilution with 4 parts of water maximum. Other dilution ratios are possible depending on the specific application. It may then be necessary to install an agitator in the lubricant reservoir to prevent the solid lubricant particles from settling. The wetting capacity should also be checked.
Protect from frost and direct heat.

Chain lubricant for extremely high temperatures
Solvent-free
Excellent wetting capacity
High stability

Characteristics	Klüberplus S 01-004
Article number	042155
Colour space	black
Texture	homogeneous , very viscous
Service temperature, upper limit	500 °C
Density, Klüber method: PN 024, 20°C	approx 1.12 g/cm³
pH-value, DIN 51369, electrometrically / undiluted	approx 7.6
Flow time, DIN EN ISO 2431, equipment: flow cup, 5 mm nozzle	approx 45 s
Üretim tarihinden itibaren minimum raf ömrü – açılmamış orijinal ambalajında, serin ve kuru yerde, yaklaşık	12 months

kluberplus-s-01-004.pdf kluberplus-s-01-004-en.pdf

Products

Home-Page | Products | KLUBERPLUS S 01-004

KLUBERPLUS S 01-004