Products

Home-Page | Products | KLUBERSYNTH CZ 2-85

KLUBERSYNTH CZ 2-85

Operators and OEMs of film stretchers have to meet constantly growing requirements: failure-free operation, reduced downtime and increasing energy savings. This cannot be fully attained with conventional high temperature chain oils. A significant improvement of this situation is achieved if the cleaning process takes place regularly. This requires a special chain cleaning oil.

Klübersynth CZ 2-85 is an efficient cleaning oil for your film stretching machinery. Through our partnership with the international

OEMs and operators of film stretching machinery, we have a 40-year history of in-depth expertise in the development of high-temperature chain oils.

Klübersynth CZ 2-85 offers you a matching solution for the continuous operation of film stretchers . This special low-viscosity, thermally stable cleaning and flushing oil based on ester oil with additional lubricating and cleaning substances was developed in our research and test lab in cooperation with our customers.

The composition of Klübersynth CZ 2-85 allows it to dissolve used oil which has become pasty and flush dirt and wear particles out of the chain track system. This reduces wear and extends the necessary service intervals. The cleaning effect of Klübersynth CZ 2- 85 also reopens narrowed clearances, resulting in optimised lubrication of friction points and a reduction in energy consumption.

Furthermore, Klübersynth CZ 2-85 was developed as a flushing oil for the oil change-over of the chain system.

  • Klübersynth CZ 2-85 is a fully synthetic high-temperature oil that was especially developed for cleaning conveyor chain sliding systems and pins in biaxial high-speed film stretchers.
  • Klübersynth CZ 2-85 is used as a flushing oil. The chain system and oil-containing parts of the system should be flushed with Klübersynth CZ 2-85 this reinforces the effect of the changeover.
  • Klübersynth CZ 2-85 is miscible with PRIMIUM SUPER, PRIMIUM SUPER M93 or Klübersynth CH 2-280. We recommend, however, using it undiluted so that it can release its full benefits.
  • Klübersynth CZ 2-85 is not miscible with PRIMIUM FLUID SPECIAL. The cleaning process with Klübersynth CZ 2-85 has to take place outside of film production. Afterwards the system has to be operated at idle with the chain oil for some time until the lubricant reaches all lubrication points.
  • Easy application
  • Higher productivity due to reduced downtime
  • Less frequent servicing due to optimum lubricant backflow throughout the chain system
  • Lower energy consumption due to optimum lubrication conditions
Characteristics Klübersynth CZ 2-85
Article number 002144
Composition, type of oil ester oil
Appearance clear - turbid
Colour space yellow
Service temperature, upper limit 180 °C
Density, Klüber method: PN 024, 20°C approx. 0.98 g/cm³
Flash point, DIN EN ISO 2592, Cleveland open cup ≥ 190 °C
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 10.5 mm²/s
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 85 mm²/s
Viscosity index, DIN ISO 2909 ≥ 105
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months

 

Konya Web Tasarım, Tuyan Tasarım ve Reklam Ajansı