For use in continuous belt presses manufacturing fibreboard, such as particle, MDF, HDF, OSB or LVL boards.
The product has been designed especially for use in the following systems:
ContiRoll® of Messrs. Siempelkamp
Conti-Panel-System of Messrs. Dieffenbacher
küsters press®/contipressTM of Messrs. Metso/Küsters
Complex lubrication points in the heating and compression area are:

• steel belts, roller rod carpets, heating platens
• roller bar chains
• contact-pressure and alignment chains

or

• steel belts, beds of special roller chains, heating platens

The friction points, i.e. steel belts & roller rods, are fully exposed to heating and compression temperatures. Chains are exposed to radiant heat typically at temperatures of 160 °C to 190 °C.

The other chains, pins and bending rods are lubricated with other HOTEMP SUPER products depending on machine design and operating conditions.

According to the experience we gained on our test rigs and in practice, HOTEMP SUPER N PLUS does not form any lacquer-like residues when properly applied, i.e. if belts, roller bars, chains and slide rails are always covered with an oil film. However, extremely high temperatures in combination with insufficient lubrication may lead to the formation of powdery residues. When applying fresh oil in time, such residues will be regenerated and ensure proper lubricant supply to the friction points.