KLUBEROIL 4 UH1-320 N

Klüberoil 4 UH1 N is a polyalphaolefin-based, high-performance multi-purpose oil and gear oil that can meet the increasing power density and increasing requirements of modern gears. Klüberoil 4 UH1 N contains high-level raw materials and improved additives that provide maximum performance in the lubrication of gear equipment.

Klüberoil 4 UH 1 N oils are NSF H1 registered and thus comply with FDA 21 CFR § 178.3570 for the food and pharmaceutical industry. These oils have been developed for points where there is a risk of incidental contact with packaging materials and products in the food, cosmetics, pharmaceutical and feed industries.

The use of Klüberoil 4 UH1 N oils contributes to increasing the safety of production processes. We still recommend performing an additional risk analysis such as HACCP.

It is IS0 21469 certified and supports compliance with hygiene requirements on your production line.

Klüberoil 4 UH 1 N meets the requirements according to DIN 51517-3, CLP with an ISO VG value of 68 to 680. Klüberoil 4 UH 1 N can be used in relevant gears without consulting the gear manufacturers, observing the general application notes.

The gears are effectively protected against wear even under extreme sudden loads, vibration and oscillation or in the absence of break-in lubrication. Good wear protection of gears and bearings ensures that lubricated equipment reaches its calculated operating life and thus achieves lower maintenance and repair costs.

Klüberoil 4 UH 1 N offers a much longer working life than mineral oils and white oils, thanks to the excellent aging and oxidation resistance of selected base oils; Thus, service intervals can be extended and maintenance costs can be reduced. Its low foaming tendency and anti-corrosion properties ensure trouble-free gear operation. It contributes to the prevention of leakage and contamination thanks to its good elastomer compatibility. Good viscosity-temperature behavior supports adequate film formation over a wide operating temperature range, even at high and rising temperatures.

Therefore, a single viscosity range can cover low and high temperatures in many applications. Therefore, a single viscosity grade can handle both low and high temperatures in many applications.

The optimized friction behavior provided by carefully selected base oils reduces power loss and increases gear efficiency.

Klüberoil 4 UH1 N, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, Sumitomo, Bonfiglioli, Brevini, STM, Watt Drive etc. Approved by.

By using the Klübersynth G 4 you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.

Klüberoil 4 UH1 has been developed for the lubrication of spur, bevel and worm gears, bearings and connection points exposed to high loads, as well as lifting, drive and transport chains.
Klüberoil UH1 can be used by immersion, immersion circulation and injection methods. It is also possible to use Klübersynth drip feed lubricators, brushes, oil cans or suitable automatic lubrication systems. When using automatic lubrication systems, observe the manufacturer's instructions regarding the maximum permissible viscosity. Lower viscosities can also be used for spray lubrication.
Klüberoil 4 UH 1 N is miscible with mineral oils and synthetic hydrocarbons. Before the first use of Klüberoil 4 UH 1 N, we recommend cleaning the gears and the entire system and flushing with new oil. Especially in accordance with the H1 certificate, mixing Klübreoil 4 UH1 oils with non-food grade oils should be avoided.
For use at permanent temperatures of maximum 80 °C, gaskets made of NBR can be used. For higher temperatures, seals made of FKM should be selected. It should be noted that elastomers from one or more manufacturers behave differently and should be tested.
To check the contact pattern during operation, the contact surface detection paint Klübertop P 39-462 Spray (Art. No. 081295) can be used.

It is NSF H1 registered and IS0 21469 certified.
Provides high abrasion protection.
Offers good wear protection for gears and bearings.
It provides safe lubrication film formation thanks to its good dynamic viscosity.
It offers excellent aging and oxidation resistance.
It offers a wide operating temperature range thanks to its good viscosity-temperature behavior.
It has a low tendency to foam.
It saves energy thanks to optimized friction behavior.
Elastomer compatibility is good.
Numerous gear manufacturers are OEM approved.

Ürün Bilgisi	Klüberoil 4 UH1-32 N	Klüberoil 4 UH1-46 N	Klüberoil 4 UH1-68 N	Klüberoil 4 UH1-100 N
Artikel Numarası	029037	029038	029039	029040
Çalışma Sıcaklığı, Üst Limit	120 °C	120 °C	120 °C	120 °C
NSF-H1, K3 Tescil Numarası	121152	121175	121174	121173
Yoğunluk, DIN 51757, 15°C	Yaklaşık 844 kg/m³	Yaklaşık 847 kg/m³	Yaklaşık 851 kg/m³	Yaklaşık 855 kg/m³
Parlama Noktası, DIN EN ISO 2592, Cleveland, Açık Kap	≥ 200 °C	≥ 200 °C	≥ 200 °C	≥ 200 °C
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım I	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım III	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
Köpük Testi, ISO 6247 / ASTM D892, 93.5°C, Adım II	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
ISO Viskozite Sınıfı, DIN ISO 3448, ISO VG	32	46	68	100
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	Yaklaşık 6 mm²/s	Yaklaşık 8 mm²/s	Yaklaşık 11 mm²/s	Yaklaşık 14 mm²/s
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	Yaklaşık 32 mm²/s	Yaklaşık 46 mm²/s	Yaklaşık 68 mm²/s	Yaklaşık 100 mm²/s
Viskozite İndeksi, DIN ISO 2909	≥ 135	≥ 135	≥ 140	≥ 140
Bakır Korozyonu, DIN EN ISO 2160, 24 Hours, 100°C	1 - 100 - 24 Korozyon Derecesi	1 - 100 - 24 Korozyon Derecesi	1 - 100 - 24 Korozyon Derecesi	1 - 100 - 24 Korozyon Derecesi
Çelik Korozyonu, DIN ISO 7120 / ASTM D665, Yöntem A, 24 Hours, 60°C	Pas Yok	Pas Yok	Pas Yok	Pas Yok
Akma Noktası, DIN ISO 3016	≤ -39 °C	≤ -39 °C	≤ -36 °C	≤ -36 °C
Yaşlanma Davranışı, DIN EN ISO 4263-4 / ASTM D2893, 312 Hours, 95°C, 100°C'de Viskozitede Artış	≤ 6 %	≤ 6 %	≤ 6 %	≤ 6 %
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Kafes Aşınması	≤ 200 mg	≤ 200 mg	≤ 200 mg	≤ 200 mg
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Rulman Aşınması	≤ 30 mg	≤ 30 mg	≤ 30 mg	≤ 30 mg
FZG Aşındırma Testi, DIN ISO 14635-1, A / 8.3 / 90, Başarısız Yük Kademesi	≥ 12	≥ 12	≥ 12	≥ 12
Üretim Tarihinden İtibaren Minimum Raf Ömrü – Açılmamış Orijinal Ambalajında, Serin ve Kuru Yerde, Yaklaşık	36 Ay	36 Ay	36 Ay	36 Ay

Ürün Bilgisi	Klüberoil 4 UH1-150 N	Klüberoil 4 UH1-220 N	Klüberoil 4 UH1-320 N	Klüberoil 4 UH1-460 N
Artikel Numarası	029041	029042	029034	029043
Çalışma Sıcaklığı, Üst Limit	120 °C	120 °C	120 °C	120 °C
NSF-H1, K3 Tescil Numarası	121172	121171	122841	121170
Yoğunluk, DIN 51757, 15°C	Yaklaşık 858 kg/m³	Yaklaşık 861 kg/m³	Yaklaşık 862 kg/m³	Yaklaşık 862 kg/m³
Parlama Noktası, DIN EN ISO 2592, Cleveland, Açık Kap	≥ 200 °C	≥ 200 °C	≥ 200 °C	≥ 200 °C
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım I	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım II	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
Köpük Testi, ISO 6247 / ASTM D892, 93.5°C, Adım II	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
ISO Viskozite Sınıfı, DIN ISO 3448, ISO VG	150	220	320	460
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	Yaklaşık 19 mm²/s	Yaklaşık 26 mm²/s	Yaklaşık 35 mm²/s	Yaklaşık 47 mm²/s
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	Yaklaşık 150 mm²/s	Yaklaşık 220 mm²/s	Yaklaşık 320 mm²/s	Yaklaşık 460 mm²/s
Viskozite İndeksi, DIN ISO 2909	≥ 140	≥ 140	≥ 150	≥ 150
Bakır Korozyonu, DIN EN ISO 2160, 24 Hours, 100°C	1 - 100 - 24 Korozyon Derecesi	1 - 100 - 24 Korozyon Derecesi	1 - 100 - 24 Korozyon Derecesi	1 - 100 - 24 Korozyon Derecesi
Çelik Korozyonu, DIN ISO 7120 / ASTM D665, Yöntem A, 24 Hours, 60°C	Pas Yok	Pas Yok	Pas Yok	Pas Yok
Akma Noktası, DIN ISO 3016	≤ -36 °C	≤ -30 °C	≤ -30 °C	≤ -30 °C
Yaşlanma Davranışı, DIN EN ISO 4263-4 / ASTM D2893, 312 Hours, 95°C, 100°C'de Viskozitede Artış	≤ 6 %	≤ 6 %	≤ 6 %	≤ 6 %
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Kafes Aşınması	≤ 200 mg	≤ 200 mg	≤ 200 mg	≤ 200 mg
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Rulman Aşınması	≤ 30 mg	≤ 30 mg	≤ 30 mg	≤ 30 mg
FZG Aşındırma Testi, DIN ISO 14635-1, A / 8.3 / 90, Başarısız Yük Kademesi	≥ 12	≥ 12	≥ 12	≥ 12
Üretim Tarihinden İtibaren Minimum Raf Ömrü – Açılmamış Orijinal Ambalajında, Serin ve Kuru Yerde, Yaklaşık	36 Ay	36 Ay	36 Ay	36 Ay

Ürün Bilgisi	Klüberoil 4 UH1-680 N	Klüberoil 4 UH1-1500 N
Artikel Numarası	029044	029045
Çalışma Sıcaklığı, Üst Limit	120 °C	120 °C
NSF-H1, K3 Tescil Numarası	121169	122842
Yoğunluk, DIN 51757, 15°C	863 kg/m³	Yaklaşık 866 kg/m³
Parlama Noktası, DIN EN ISO 2592, Cleveland, Açık Kap	≥ 200 °C	≥ 200 °C
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım I	≤ 100/10 ml	-
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım III	≤ 100/10 ml	-
Köpük Testi, ISO 6247 / ASTM D892, 93.5°C, Adım II	≤ 100/10 ml	-
ISO Viskozite Sınıfı, DIN ISO 3448, ISO VG	680	1500
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	Yaklaşık 65 mm²/s	Yaklaşık 125 mm²/s
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	Yaklaşık 680 mm²/s	Yaklaşık 1500 mm²/s
Viskozite İndeksi, DIN ISO 2909	≥ 150	≥ 180
Bakır Korozyonu, DIN EN ISO 2160, 24 Hours, 100°C	1 - 100 - 24 Korozyon Derecesi	1 - 100 - 24 Korozyon Derecesi
Çelik Korozyonu, DIN ISO 7120 / ASTM D665, Yöntem A, 24 Hours, 60°C	Pas Yok	Pas Yok
Akma Noktası, DIN ISO 3016	≤ -27 °C	≤ -25 °C
Yaşlanma Davranışı, DIN EN ISO 4263-4 / ASTM D2893, 312 Hours, 95°C, 100°C'de Viskozitede Artış	≤ 6 %	≤ 6 %
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Kafes Aşınması	≤ 200 mg	≤ 200 mg
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Rulman Aşınması	≤ 30 mg	≤ 30 mg
FZG Aşındırma Testi, DIN ISO 14635-1, A / 8.3 / 90, Başarısız Yük Kademesi	≥ 12	≥ 12
Üretim Tarihinden İtibaren mMinimum Raf Ömrü – Açılmamış Orijinal Ambalajında, Serin ve Kuru Yerde, Yaklaşık	36 Ay	36 Ay

kluberoil-4-uh1-320-n.pdf

Products

Home-Page | Products | KLUBEROIL 4 UH1-320 N

KLUBEROIL 4 UH1-320 N