KLUBERSYNTH GEM 4 N

Synthetic high-performance gear and multi-purpose oils with KlüberComp Lube Technology.

Klüberoil 4 UH1 N is a polyalphaolefin-based, high-performance multi-purpose oil and gear oil that can meet the increasing power density and increasing requirements of modern gears. Klüberoil 4 UH1 N contains high-level raw materials and improved additives that provide maximum performance in the lubrication of gear equipment.

Klübersynth GEM 4 N clearly exceeds the CLP requirements according to DIN 51517-3. Klüberoil 4 UH 1 N can be used in relevant gears without consulting the gear manufacturers, observing the general application notes.

Klübersynth GEM 4 N offers high friction load capacity. The gears are adequately protected against friction even at extremely high peak loads, vibrations or oscillations. Good wear protection of gears and bearings ensures that lubricated equipment reaches its calculated operating life and thus achieves lower maintenance and repair costs. Thanks to its high micropitting resistance of GFT ≥ 10 according to FVA 54/7, it offers effective protection for gears exposed to high loads and is resistant to this type of damage.

Klüberoil 4 UH 1 N offers a much longer working life than mineral oils and white oils, thanks to the excellent aging and oxidation resistance of selected base oils; Thus, service intervals can be extended and maintenance costs can be reduced. The product's low foaming tendency and anti-rust properties ensure trouble-free gear operation. Freudenberg seals made of 72 NBR 902, 75 FKM 585, 75 FKM 260466 and 75 FKM 170055 are statically and dynamically resistant to Klübersynth GEM 4 N. Leakage and oil contamination are prevented.

Therefore, a single viscosity range can cover low and high temperatures in many applications. Therefore, a single viscosity grade can handle both low and high temperatures in many applications.

Klübersynth GEM 4 N N oils have been specially developed for the lubrication of spur, bevel, worm and planetary gears operating under high loads. These types of gears are mostly used in the steel, mining and sugar industries. Klüberoil GEM 1 N oils are also used for the lubrication of standard worm gears as specified in DIN 3996. In addition, Klübersynth GEM 4 N can be used for the lubrication of rolling and plain bearings, all types of gear couplings, chains, guide bearings, links, spindles and shafts and pumps, especially in applications with equipment exposed to elevations or significant temperature fluctuations.
Klübersynth GE 4 75 W 90 can be applied by immersion, circulation and oil injection.
It is also possible to use Klübersynth drip feed lubricators, brushes, oil cans or suitable automatic lubrication systems.
When using automatic lubrication systems, pay attention to the manufacturer's instructions regarding the maximum permissible viscosity. Lower viscosities can also be used for spray lubrication.
Klübersynth G 4 is miscible with mineral oils. However, for the Klübersynth G 4 to operate at full performance, the amount of residues in a previously used lubricant must not exceed 5%.
For use at permanent temperatures of maximum 80 °C, gaskets made of NBR can be used. For higher temperatures, seals made of FKM should be selected. It should be noted that elastomers from one or more manufacturers behave differently and should be tested.
To check the contact pattern during operation, the contact surface detection paint Klübertop P 39-462 Spray (Art. No. 081295) can be used.
When switching to Klüberoil GEM 1 N, residues of previously used gear oil can be easily removed by adding Klüber Summit Varnasolv HV (Art. No. 050135).

Provides high abrasion protection.
Provides excellent wear protection for gears and bearings.
It provides safe lubrication film formation thanks to its good dynamic viscosity.
It shows high micropitting resistance.
It offers excellent aging and oxidation resistance.
It offers a wide operating temperature range thanks to its good viscosity-temperature behavior.
It has a low tendency to foam.
It saves energy thanks to its optimized friction behavior.
Elastomer compatibility is good.
Approved by numerous gear manufacturers.

Ürün Bilgisi	Klübersynth GEM 4-32 N	Klübersynth GEM 4-46 N	Klübersynth GEM 4-68 N	Klübersynth GEM 4-100 N
Artikel Numarası	012229	012230	012231	012232
Çalışma Sıcaklığı, Alt Limit	50 °C	-40 °C	-40 °C	-40 °C
Çalışma Sıcaklığı, Üst Limit	140 °C	140 °C	140 °C	140 °C
Tanım, DIN 51502	CLP HC 32	CLP HC 46	CLP HC 68	CLP HC 100
Tanım, ISO 12925-1	CKC 32	CKC 46	CKC 68	CKC 100
Yoğunluk, DIN 51757, 15°C	840 kg/m³	Yaklaşık 840 kg/m³	850 kg/m³	Yaklaşık 850 kg/m³
Parlama Noktası, DIN EN ISO 2592, Cleveland, Açık Kap	≥ 200 °C	≥ 200 °C	≥ 200 °C	≥ 200 °C
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım I	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım III	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
Köpük Testi, ISO 6247 / ASTM D892, 93.5°C, Adım I	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
ISO Viskozite Sınıfı, DIN ISO 3448, ISO VG	32	46	68	100
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	Yaklaşık 6 mm²/s	Yaklaşık 8 mm²/s	Yaklaşık 11 mm²/s	Yaklaşık 14 mm²/s
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	Yaklaşık 32 mm²/s	Yaklaşık 46 mm²/s	Yaklaşık 68 mm²/s	yaklaşık 100 mm²/s
Viskozite İndeksi, DIN ISO 2909	≥ 135	≥ 140	≥ 140	≥ 150
Bakır Korozyonu, DIN EN ISO 2160, 3 Hours, 100°C	1 - 100 - 3 Korozyon Derecesi	1 - 100 - 3 Korozyon Derecesi	1 - 100 - 3 Korozyon Derecesi	1 - 100 - 3 Korozyon Derecesi
Çelik Korozyonu, DIN ISO 7120 / ASTM D665, Yöntem A, 24 Hours, 60°C	Pas Yok	Pas Yok	Pas Yok	Pas Yok
Akma Noktası, DIN ISO 3016	≤ -50 °C	≤ -40 °C	≤ -40 °C	≤ -40 °C
Yaşlanma Davranışı, DIN EN ISO 4263-4 / ASTM D2893, 312 Hours, 95°C, 100°C'de Viskozitede Artış	≤ 6 %	≤ 6 %	≤ 6 %	≤ 6 %
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Kafes Aşınması	≤ 200 mg	≤ 200 mg	≤ 200 mg	≤ 200 mg
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Rulman Aşınması	< 5 mg	< 5 mg	< 5 mg	< 5 mg
FZG Aşındırma Testi, DIN ISO 14635-1, Based on Standard, A / 16.6 / 90, Başarısız Yük Kademesi	≥ 12	≥ 12	≥ 12	≥ 12
FZG Aşındırma Testi, DIN ISO 14635-1, A / 8.3 / 90, Başarısız Yük Kademesi	≥ 14	≥ 14	≥ 14	≥ 14
Üretim Tarihinden İtibaren Minimum Raf Ömrü – açılmamış orijinal Ambalajında, Serin ve Kuru Yerde, Yaklaşık	24 Ay	24 Ay	24 Ay	24 Ay

Ürün Bilgisi	Klübersynth GEM 4-150 N	Klübersynth GEM 4-220 N	Klübersynth GEM 4-320 N	Klübersynth GEM 4-460 N
Artikel Numarası	012233	012234	012235	012236
Çalışma Sıcaklığı, Alt Limit	-40 °C	-40 °C	-30 °C	-30 °C
Çalışma Sıcaklığı, Üst Limit	140 °C	140 °C	140 °C	140 °C
Tanım, DIN 51502	CLP HC 150	CLP HC 220	CLP HC 320	CLP HC 460
Tanım, ISO 12925-1	CKC 150	CKC 220	CKC 320	CKC 460
Yoğunluk, DIN 51757, 15°C	Yaklaşık 860 kg/m³	Yaklaşık 860 kg/m³	Yaklaşık 860 kg/m³	Yaklaşık 860 kg/m³
Parlama Noktası, DIN EN ISO 2592, Cleveland, Açık Kap	≥ 200 °C	≥ 200 °C	≥ 200 °C	≥ 200 °C
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım I	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım III	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
Köpük Testi, ISO 6247 / ASTM D892, 93.5°C, Adım I	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
ISO Viskozite Sınıfı, DIN ISO 3448, ISO VG	150	220	320	460
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	Yaklaşık 20 mm²/s	Yaklaşık 27 mm²/s	Yaklaşık 36 mm²/s	Yaklaşık 47 mm²/s
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	Yaklaşık 150 mm²/s	Yaklaşık 220 mm²/s	Yaklaşık 320 mm²/s	Yaklaşık 460 mm²/s
Viskozite İndeksi, DIN ISO 2909	≥ 150	≥ 150	≥ 155	≥ 160
Bakır Korozyonu, DIN EN ISO 2160, 3 Hours, 100°C	1 - 100 - 3 Korozyon Derecesi	1 - 100 - 3 Korozyon Derecesi	1 - 100 - 3 Korozyon Derecesi	1 - 100 - 3 Korozyon Derecesi
Çelik Korozyonu, DIN ISO 7120 / ASTM D665, Yöntem A, 24 Hours, 60°C	Pas Yok	Pas Yok	Pas Yok	Pas Yok
Akma Noktası, DIN ISO 3016	≤ -40 °C	≤ -40 °C	≤ -35 °C	≤ -30 °C
Yaşlanma Davranışı, DIN EN ISO 4263-4 / ASTM D2893, 312 Hours, 95°C, 100°C'de Viskozitede Artış	≤ 6 %	≤ 6 %	≤ 6 %	≤ 6 %
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Kafes Aşınması	≤ 200 mg	≤ 200 mg	≤ 200 mg	≤ 200 mg
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Rulman Aşınması	< 5 mg	< 5 mg	< 5 mg	< 5 mg
FZG Aşındırma Testi, DIN ISO 14635-1, Based on Standard, A / 16.6 / 90, Başarısız Yük Kademesi	≥ 12	≥ 12	≥ 12	≥ 12
FZG Aşındırma Testi, DIN ISO 14635-1, A / 8.3 / 90, Başarısız Yük Kademesi	≥ 14	≥ 14	≥ 14	≥ 14
Üretim Tarihinden İtibaren Minimum Raf Ömrü – açılmamış orijinal Ambalajında, Serin ve Kuru Yerde, Yaklaşık	24 Ay	24 Ay	24 Ay	24 Ay

Ürün Bilgisi	Klübersynth GEM 4-150 N	Klübersynth GEM 4-220 N	Klübersynth GEM 4-320 N
Artikel Numarası	012237	012321	012374
Çalışma Sıcaklığı, Alt Limit	-30 °C	-25 °C	-25 °C
Çalışma Sıcaklığı, Üst Limit	140 °C	140 °C	140 °C
Tanım, DIN 51502	CLP HC 680	CLP HC 1000	CLP HC 1500
Tanım, ISO 12925-1	CKC 680	CKC 1000	CKC 1500
Yoğunluk, DIN 51757, 15°C	Yaklaşık 860 kg/m³	Yaklaşık 860 kg/m³	Yaklaşık 864 kg/m³
Parlama Noktası, DIN EN ISO 2592, Cleveland, Açık Kap	≥ 200 °C	≥ 200 °C	≥ 200 °C
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım I	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım III	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
Köpük Testi, ISO 6247 / ASTM D892, 93.5°C, Adım I	≤ 100/10 ml	≤ 100/10 ml	≤ 100/10 ml
ISO Viskozite Sınıfı, DIN ISO 3448, ISO VG	680	1000	1500
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	Yaklaşık 62 mm²/s	Yaklaşık 90 mm²/s	Yaklaşık 130 mm²/s
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	Yaklaşık 680 mm²/s	Yaklaşık 1000 mm²/s	Yaklaşık 1500 mm²/s
Viskozite İndeksi, DIN ISO 2909	≥ 160	≥ 165	≥ 170
Bakır Korozyonu, DIN EN ISO 2160, 3 Hours, 100°C	1 - 100 - 3 Korozyon Derecesi	1 - 100 - 3 Korozyon Derecesi	1 - 100 - 3 Korozyon Derecesi
Çelik Korozyonu, DIN ISO 7120 / ASTM D665, Yöntem A, 24 Hours, 60°C	Pas Yok	Pas Yok	Pas Yok
Akma Noktası, DIN ISO 3016	≤ -30 °C	≤ -25 °C	≤ -25 °C
Yaşlanma Davranışı, DIN EN ISO 4263-4 / ASTM D2893, 312 Hours, 95°C, 100°C'de Viskozitede Artış	≤ 6 %	≤ 6 %	≤ 6 %
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Kafes Aşınması	≤ 200 mg	≤ 200 mg	≤ 200 mg
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Rulman Aşınması	< 5 mg	< 5 mg	< 5 mg
FZG Aşındırma Testi, DIN ISO 14635-1, Based on Standard, A / 16.6 / 90, Başarısız Yük Kademesi	≥ 12	≥ 12	≥ 12
FZG Aşındırma Testi, DIN ISO 14635-1, A / 8.3 / 90, Başarısız Yük Kademesi	≥ 14	≥ 14	≥ 14
Üretim Tarihinden İtibaren Minimum Raf Ömrü – açılmamış orijinal Ambalajında, Serin ve Kuru Yerde, Yaklaşık	24 Ay	24 Ay	24 Ay

klubersynth-gem-4-n.pdf

Products

Home-Page | Products | KLUBERSYNTH GEM 4 N

KLUBERSYNTH GEM 4 N