KLUBERSYNTH GHE 6

Synthetic gear and circulation oil.

Klübersynth GHE 6 oils are polyglycol-based gear and circulation oils that offer high abrasion load capacity, aging and oxidation resistance. Klübersynth GHE 6 oils have a good viscosity temperature and excellent high temperature behavior, thanks to their polyglycol base oils.

Klübersynth GHE 6 oils have been specially developed for spur, mirror, planetary and worm gears.
Klübersynth GHE 6 oils are also used for the lubrication of rolling and plain bearings as well as all gear couplings.
Klübersynth GHE 6 can be applied by immersion, circulation and oil injection.
Klübersynth GHE 6 oils are immiscible with mineral oils and synthetic hydrocarbons. We recommend that you clean the lubrication points or gears before replacement or flush them with Klübersynth GHE 6 oil to be used after replacement.
Klübersynth GHE 6 oils are neutral towards ferrous and non-ferrous metals.
Friction may increase when contact is made with the surfaces of aluminum or aluminum alloy design elements exposed to dynamic loads. If necessary, preliminary tests can be performed. Sealing elements made of NBR can be used at constant temperatures up to 80°C. At higher temperatures, we recommend the use of seals made of FKM.
It should be noted that elastomers from one or more manufacturers behave differently and should be tested.
When applying Klübersynth GHE 6 oils we recommend the use of two-component paint for interior coatings. Oil measuring glasses should preferably be made of natural glass or polyimide material.
Other clear plastics, such as Plexiglas, tend to crack under too much stress.
The suitability of substances coming into contact with Klübersynth GHE 6 oils must be tested, especially before serial application.

Klübersynth GHE 6 oils last much longer than mineral oils, thanks to the excellent aging and oxidation resistance of the synthetic base oil. Thus, it provides longer maintenance intervals and, in some cases, lifetime lubrication.
High abrasion load resistance offers good abrasion protection even at high peak loads.
With good wear protection on gears and bearings, it prevents premature component failure and reduces maintenance and repair costs.
The optimum friction behavior of polyglycol base oil reduces power losses and increases efficiency.
Excellent viscosity-temperature behavior supports lubricant film formation even at high temperatures.
72 NBR 902, 75 FKM 585 and 75 FKM 170055 seals are resistant to Klübersynth GHE 6 oils. Leakage and contamination are prevented.
Approved by Flottweg Separation Technology.

Ürün Bilgisi	Klübersynth GHE 6-100	Klübersynth GHE 6-460
Artikel Numarası	012278	012313
Çalışma Sıcaklığı, Alt Limit	-35 °C	-30 °C
Çalışma Sıcaklığı, Üst Limit	160 °C	160 °C
Yoğunluk, DIN 51757, 15°C	1043 kg/m³	Yaklaşık 1077 kg/m³
Parlama Noktası, DIN EN ISO 2592, Cleveland, Açık Kap	≥ 250 °C	≥ 280 °C
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım I	≤ 100/10 ml	≤ 100/10 ml
Köpük Testi, ISO 6247 / ASTM D892, 24°C, Adım III	≤ 100/10 ml	≤ 100/10 ml
Köpük Testi, ISO 6247 / ASTM D892, 93.5°C, Adım II	≤ 100/10 ml	≤ 100/10 ml
ISO Viskozite Sınıfı, DIN ISO 3448, ISO VG	100	460
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	Yaklaşık 20 mm²/s	Yaklaşık 73 mm²/s
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 20°C	Yaklaşık 270 mm²/s	Yaklaşık 1270 mm²/s
Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	Yaklaşık 100 mm²/s	Yaklaşık 460 mm²/s
Viskozite İndeksi, DIN ISO 2909	≥ 190	≥ 230
Bakır Korozyonu, DIN EN ISO 2160, 24 Hours, 100°C	1 - 100 - 24 Korozyon Derecesi	1 - 100 - 24 Korozyon Derecesi
Çelik Korozyonu, DIN ISO 7120 / ASTM D665, Yöntem A, 24 Hours, 60°C	Pas Yok	Pas Yok
Akma Noktası, DIN ISO 3016	≤ -40 °C	≤ -35 °C
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Kafes Aşınması	≤ 200 mg	≤ 220 mg
FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Rulman Aşınması	≤ 30 mg	≤ 30 mg
FZG Aşındırma Testi, DIN ISO 14635-1, A / 8.3 / 90, Başarısız Yük Kademesi	≥ 14	≥ 14
Üretim Tarihinden İtibaren Minimum Raf Ömrü – Açılmamış Orijinal Ambalajında, Serin ve Kuru Yerde, Yaklaşık	36 Ay	36 Ay

klubersynth-ghe-6.pdf

Products

Home-Page | Products | KLUBERSYNTH GHE 6

KLUBERSYNTH GHE 6