KLUBERCUT CO 6-102

Klübercut CO 6-102 is a metal-working oil. It is environmentally compatible and can be used for metal cutting and punching processes. This high-quality metalworking oil is not miscible with water and is applied undiluted. The substances mentioned in the following are not contained in the formulation of this lubricant, however the occurrence of traces cannot be excluded.
amines
boron
chlorine
phosphor
sulphur
heavy metals
silicone

and thus shows an almost neutral behaviour towards metals. Klübercut CO 6-102 is based on vegetable raw materials and is rapidly biodegradable at the same time. Apart from minute residue on the swarf, the product undergoes rapid biodegradation in the scrap phase and is transformed into a substance non hazardous to the environment.

The emphasis of application is in the range of easy to medium cutting processes, e.g. in

drilling and boring
milling
sawing.

Klübercut CO 6-102 is suitable for a number of metals, particularly for

Al and Al alloys
nonferrous metals

but also for

steels
composite materials.

As Klübercut CO 6-102 is used undiluted, only a very small quantity is required on the friction point, i.e. the point of contact between the tool and the workpiece.
Micro-dosing constitutes a technical progress in the direction of environmental compatibility.
The advantages include:

only minute oil residue remains on the swarf; the swarf can
be directly transferred to the scrap cycle and be re-used;
no disposal of coolants, no separation and disposal of used emulsions;
clearly improved working environment; almost dry machines
and components, less oil mist or oil vapour;
improved tool life and surface quality; the undiluted metalworking oil reduces friction and heat generation.

Rapidly biodegradable
Environmentally compatible
Almost dry machines
Almost dry tools and swarfs
Low consumption

Characteristics	Klübercut CO 6-102
Article number	046087
Colour space	yellow
Biodegradability, OECD 301 F, 28, within days	≥ 60 %
Density, DIN 51757, 20°C	approx. 0.92 g/cm³
Flash point, DIN EN ISO 2592, Cleveland open cup	approx. 300 °C
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 34 mm²/s
Pour point, DIN ISO 3016	approx. -15 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	12 months

klubercut-co-6-102.pdf

Products

Home-Page | Products | KLUBERCUT CO 6-102

KLUBERCUT CO 6-102