Products

Home-Page | Products | PRESPATE TB

PRESPATE TB

High performance lubricant for cold forming of sheet metal and tube parts.

It is very important to find oil that can protect the mold against wear during the metal shaping process. After the shaping process, the oil should be easily cleaned from the part surface. In this regard, PRESSPATE SEM 95/800 T and PRESSPATE TB provide you with the support you need. Both products offer excellent lubrication performance, especially in thin or thick sheet metal and tube cold forming. This provides the opportunity to operate easily even in harsh environmental conditions that may lead to an increase in the wastage rate.

Since its lubrication properties are quite good, you can achieve high performance by using a very small amount of lubricant with PRESSPATE SEM 95/800 T and PRESSPATE TB pastes. As a result, parts are easy to clean using water-based systems. PRESSPATE SEM 95/800 T has been tried and tested in numerous applications. PRESSPATE TB should be preferred for bending processes that require higher performance.

You can use PRESSPATE SEM 95/800 T and PRESSPATE TB for a wide variety of applications in cold metal forming, especially sheet metal and tubes. This includes processes such as:

  • Drawing and deep drawing
  • Bending
  • Hydroformation
  • Bending tube using mandrel

Calibrating sintered parts upon sintering Both products have been successfully used in machining steel, stainless steel, brass, aluminum and titanium-based alloys.

  • It reduces friction and wear, especially in bending and deep drawing processes where high deformation occurs.
  • It offers production stability with low waste rate.
  • Compared to ordinary metalworking oils, mold life is extended by reducing processing time and mold maintenance costs.
  • The parts being treated can be cleaned with standard cleaners and cleaning processes.
Ürün Bilgisi PRESSPATE SEM 95/800 T PRESSPATE TB
Artikel Numarası 043050 043104
Renk bej bej
Yapı Pütürlü, Yumuşak Pütürlü, Yumuşak
Yoğunluk, Klüber Yöntemi: PN 024, 20°C Yaklaşık 0.95 g/cm³ Yyaklaşık 0.93 g/cm³
Baz Yağın Kinematik Viskozitesi, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C Yaklaşık 100 mm²/s  Yaklaşık 220 mm²/s
Üretim Tarihinden İtibaren Minimum Raf Ömrü – Açılmamış Orijinal Ambalajında, Serin ve Kuru Yerde, Yaklaşık 24 Ay  24 Ay 
Konya Web Tasarım, Tuyan Tasarım ve Reklam Ajansı