DUOTEMPI PMY 45

DUOTEMPI PMY 45 is a light-coloured high-pressure lubricating paste for frictional connections subject to medium temperatures in predominantly dry environments. DUOTEMPI PMY 45 is based on mineral and synthetic hydrocarbon oils plus solid lubricants and special lithium soap. DUOTEMPI PMY 45 ensures easy assembly and disassembly of interference fits and clamping connections subject to medium loads while preventing fretting corrosion (tribocorrosion).

For low-speed (plain) bearings, guides, joints, bushes, eccentric units, seals, bolts, and hinges in all fields of plant and machine engineering. For automotive components such as gear shift gates, ball joints, seat rails, steering-knuckle pins or profile gears.
As an assembly paste:
For interference, transition, and loose fits.
As a screw paste:
For austenitic materials (A2-70) and the assembly of screws and
bolts under normal temperature conditions.
Before applying DUOTEMPI PMY 45 it is important to clean and degrease all contact surfaces and to apply the paste in a thin layer using a brush, plastic sponge or a dry, lint-free cloth. DUOTEMPI PMY 45 is compatible with many sealing materials and elastomers; however, we recommend undertaking a materials compatibility test with the lubricant used prior to series application. The friction values indicated on page 2 in the Section Product Data were determined with two different materials. Other materials/surfaces have to be checked accordingly.

Easy assembly and disassembly of frictional connections
Ensures reliable screw connection by provision of an adequate preload force during assembly
Prevents fretting corrosion enabling increased component lifetime

Characteristics	DUOTEMPI PMY 45
Article number	005066
Colour space	beige
Texture	homogeneous , short fibrous
Service temperature, lower limit	-40 °C
Service temperature, upper limit	120 °C
Density, Klüber method: PN 024, 20°C	approx. 1.2 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	245 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	275 0.1 mm
Dropping point, DIN ISO 2176 / IP 396	≥ 190 °C
Four-ball tester, welding load, DIN 51350-4	≥ 3200 N
Friction coefficient screw test, hexagon bolts M10 x 50-A2-70, DIN EN ISO 4017, tightening speed n = 5 min⁻¹, number of screws = 20, material of the nut A2, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 40 Nm, averaged bearing surface friction coefficient (initial tightening), external test	0.1
Friction coefficient screw test, hexagon bolts M10 x 50-A2-70, DIN EN ISO 4017, tightening speed n = 5 min⁻¹, number of screws = 20, material of the nut A2, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 40 Nm, averaged thread friction coefficient (initial tightening), external test	0.09
Friction coefficient screw test, hexagon bolts M10 x 50-A2-70, DIN EN ISO 4017, tightening speed n = 5 min⁻¹, number of screws = 20, material of the nut A2, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 40 Nm, standard deviation (S) of averaged bearing surface friction coefficient (initial tightening), external test	0.003
Friction coefficient screw test, hexagon bolts M10 x 50-A2-70, DIN EN ISO 4017, tightening speed n = 5 min⁻¹, number of screws = 20, material of the nut A2, face material 42CrMo4 with roughness Ra 1.6, tightening torque MA = 40 Nm, standard deviation (S) of averaged thread friction coefficient (initial tightening), external test	0.011
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx	24 months

kluber-duotempi-pmy-45.pdf

Products

Home-Page | Products | DUOTEMPI PMY 45

DUOTEMPI PMY 45