KLUBERSYNTH UH1 14-151

Synthetic lubricating grease for the food and pharmaceutical processing industry.

Klübersynth UH1 14-151 was especially developed for the food processing and pharmaceutical industry. Klübersynth UH1 14-151 shows good anti-wear properties, water resistance and corrosion protection as well as a high ageing and oxidation stability.

Klübersynth UH1 14-151 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 14-151 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Used for machines and equipment in the food processing and pharmaceutical industry, particularly for lubrication points that may have incidental and technically unavoidable contact with the food product. However, we recommend using Klübersynth UH1 14-151 at all lubrication points, in order to avoid problems due to lubricant contamination.
This special grease lubricates rolling and sliding bearings, lifting cylinders, joints, guide bars, cams, etc.
Klübersynth UH1 14-151 is applied by brush, spatula, grease gun and grease cartridge or by means of centralized lubrication systems. Before substituting other greases with Klübersynth UH1 14-151 the bearings have to be cleaned and greased. If the greases are miscible, the grease can be exchanged by means of re-lubrication.

Good corrosion protection reduces the risk of premature bearing failure
Good pumpability in centralized grease system prevents grease starvation
For a wide service temperature range due to the soft consistency of the grease
ISO 21469 certified – supports the compliance with the hygienic requirements in your production

Characteristics	Klübersynth UH1 14-151
Article number	096037
Composition, thickener	aluminium complex soap
Composition, type of oil	ester oil , synthetic hydrocarbon oil
Colour space	beige
Texture	homogeneous
Service temperature, lower limit	-45 °C
Service temperature, upper limit	120 °C
NSF H1 registration number	056354
Density, Klüber method: PN 024, 20°C	approx. 0.89 g/cm³
NLGI grade, DIN 51818	1
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	310 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	340 0.1 mm
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 22 mm²/
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 150 mm²/s
Flow pressure, DIN 51805-2, -45°C	≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396	≥ 250 °C
Speed factor (n x dm)	approx. 500000 mm/min
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months

klubersynth-uh1-14-1511.pdf klubersynth-uh1-14-151-en.pdf

Products

Home-Page | Products | KLUBERSYNTH UH1 14-151

KLUBERSYNTH UH1 14-151