KLUBERSYNTH UH1 14-31

Synthetic smooth-running grease for the food-processing and pharmaceutical industries.

Klübersynth UH1 14-31 was especially developed for the foodprocessing and pharmaceutical industries. This lubricant is NSF H1- registered and therefore complies with FDA 21 CFR § 178.3570.

The use of Klübersynth UH1 14-31, an NSF H1-registered lubricant, is a contributor towards the supporting of food safety. This needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely.

Klübersynth UH1 14-31 excels by its low-temperature and anti-wear properties as well as good water resistance and effective wear- and corrosion protection.

Klübersynth UH1 14-31 is used on machines and equipment in the food-processing and pharmaceutical industries, preferably at lubrication points where technically unavoidable contact with the food product cannot be excluded. However, we recommend supplying all lubrication points in the area with Klübersynth UH1 14- 31 so as to avoid problems of lubricant contamination.
Klübersynth UH1 14-31 should preferably be used when extremely smooth running and a wide speed range are required.
It is intended for plain- and rolling bearings, lifting cylinders, joints, seals, etc. as well as for the lubrication of friction points in freeze and deep-freeze tunnels or for chains which run more smoothly when lubricated with a soft grease.
Klübersynth UH1 14-31 can be applied by brush, spatula, grease gun or automatic lubricating systems.
Service temperatures of Klübersynth UH1 14-31 range from -45 °C to 120 °C. For certain applications, lower temperatures are also possible. The lubricating film retains its functionality down to approx. -70 °C.

klubersynth-uh1-14-31-en.pdf klubersynth-uh1-14-31.pdf

Reliable operation also at low temperatures due to soft consistency and low base oil viscosity
Reduced risk of premature component failure due to good adhesion and anticorrosive behaviour
Lubricant starvation prevented by very good pumpability in centralised lubricating systems
NSF-H1 registration for higher process reliability

Characteristics	Klübersynth UH1 14-31
Article number	096029
Colour space	white
Texture	homogeneous , short fibrous
Functional lubricant film	≥ -70°C °C
Service temperature, lower limit	-45 °C
Service temperature, upper limit	120 °C
NSF H1 registration number	056356
Density, Klüber method: PN 024, 20°C	approx 0.9 g/cm³
NLGI grade, DIN 51818	1
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	310 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	340 0.1 mm
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx 6 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx 30 mm²/s
Flow pressure, DIN 51805-2, -45°C	≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396	≥ 220 °C
Speed factor (n x dm)	approx 700000 mm/min
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months

klubersynth-uh1-14-31-en.pdf klubersynth-uh1-14-31.pdf

Products

Home-Page | Products | KLUBERSYNTH UH1 14-31

KLUBERSYNTH UH1 14-31