Products

Home-Page | Products | PARALIQ GA 3400

PARALIQ GA 3400

PARALIQ GA 3400 is based on a paraffinic mineral oil and an aluminium complex soap.

PARALIQ GA 3400 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the foodprocessing, cosmetics, pharmaceutical or animal feed industries. The use of PARALIQ GA 3400 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

  • PARALIQ GA 3400 has been designed for use in enclosed gears in the food-processing and pharmaceutical industries. Due to the good corrosion and wear protection as well as soft consistency, it is preferably used for the dip-feed lubrication of gear drives and worm gears as well as for chains and gearwheels.
  • PARALIQ GA 3400 is applied by brush, spatula, grease gun or centralised lubricating system*.
  • Before applying PARALIQ GA 3400, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions exist, mandatory for food-safe H1 lubrication.
  • If the production process does not allow cleaning, we recommend the existing grease be replaced by purging the system during relubrication.
  • Please do not hesitate to contact us in respect of grease miscibility, re-lubrication procedures etc.
  • A special feature of this product is the very fast increase of worked penetration. It quickly becomes very soft (approx. 6 months) thus falling beyond the indicated worked penetration range.
  • Fluid gear grease for an easy pumpability in central lubrication systems*
  • Reduced maintenance needs due to the good corrosion and wear protection
  • NSF H1 registered supporting process reliability
  • ISO 21469 certified – supports the compliance with the hygienic requirements in your production
Characteristics PARALIQ GA 3400
Article number 096019
Composition, thickener aluminium complex soap
Composition, type of oil paraffinic mineral oil
Colour space yellow
Texture homogeneous
Service temperature, lower limit -45 °C
Service temperature, upper limit 110 °C
NSF H1 registration number  137942
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 420 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 450 0.1 mm
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree
Dropping point, DIN ISO 2176 / IP 396 ≥ 180 °C
FZG scuffing test, DIN ISO 14635-3, A / 2.8 / 50, failure load stage ≥ 12
Water resistance, DIN 51807-1, 3 h, 40°C 0 - 40 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx 12 months

 

Konya Web Tasarım, Tuyan Tasarım ve Reklam Ajansı