PARALIQ GA 343

Multi-purpose grease for food-processing and pharmaceutical industries.

PARALIQ GA 343 is a lubricating grease based on paraffinic mineral oil and an aluminium complex soap. PARALIQ GA 343 is resistant to cold and hot water. PARALIQ GA 343 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the foodprocessing, cosmetics, pharmaceutical or animal feed industries. The use of PARALIQ GA 343 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

PARALIQ GA 343 is used for many different types of machines and installations in the food-processing and pharmaceutical industries where incidental contact with the food product cannot be excluded.
Applications include the lubrication of rolling and plain bearings, lifting cylinders, joints, guide bars, guide rails, cam discs, seals etc.
Before applying PARALIQ GA 343, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions exist, mandatory for food-safe H1 lubrication.
If the production process does not allow cleaning, we recommend the existing grease be replaced by purging the system during relubrication.
The grease is applied by spatula, brush, grease gun or similar techniques. Avoid excessive lubrication. The friction points can be cleaned by means of standard cleaning agents.

Multi-purpose grease for various lubrication points
Less lubricant lost due to good water resistance
Better component protection due to good anticorrosive behaviour, good adhesion due to high consistency
NSF H1-registered for higher process reliability and compliant with halal and kosher requirements
ISO 21469 certified – supports the compliance with the hygienic requirements in your production.

Characteristics	PARALIQ GA 343
Article number	096017
Composition, thickener	aluminium complex soap
Composition, type of oil	paraffinic mineral oil
Colour space	yellow
Texture	homogeneous
Service temperature, lower limit	20 °C
Service temperature, upper limit	110 °C
NSF H1 registration number	136873
Density, Klüber method: PN 024, 20°C	approx 0.903 g/cm³
NLGI grade, DIN 51818	2
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	265 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	295 0.1 mm
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit	4000 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit	8000 mPas
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	≤ 1 corrosion degree
Flow pressure, DIN 51805-2, -20°C	≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396	≥ 220 °C
Water resistance, DIN 51807-1, 3 h, 90°C	≤ 1 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months

kluber-paraliq-ga-343.pdf kluber-paraliq-ga-343-en.pdf

Products

Home-Page | Products | PARALIQ GA 343

PARALIQ GA 343