Products

Home-Page | Products | LAMORA D

LAMORA D

Linear guides are expected to function precisely and to run smoothly despite being subject to many start-ups and stops. They often have to withstand vibrations and go a long time without maintenance. Slideway oils can often not be prevented from mixing with cooling lubricants containing water, which then leads to residue formation and shorter coolant life.

LAMORA D oils were especially developed for such taxing requirements. Our oils offer excellent lubricity also at low sliding speeds, enabling constant and precise feed motion of workpiece and tool slides. They ensure good wetting of the sliding surfaces and a high load-carrying capacity, especially of slideways with plastic coatings. Tests at SKC Schmidt GmbH & Co. (formerly Hans Schmidt Gleittechnik GmbH & Co.) have shown that the oils attain "good" to "very good" results both in terms of their coefficients of adhesion and their demulsifying behaviour in contact with customary cooling lubricants. LAMORA D oils are in compliance with ISO 6743 part 13 GA and GB.

  • LAMORA D oils are especially suited for the lubrication of heavily loaded slideways with low feed rates. LAMORA D oils have been tried and tested for the lubrication of slideways and guideways in modern machining centres, milling machines, lathes and other machine tools. As they show good compatibility with water-miscible machining fluids and cooling lubricants, LAMORA D oils can be used in applications where they may mix with aqueous media.
  • LAMORA D oils can be applied by oil can or a centralised lubricating system. If you have any other questions regarding your application, our experts will be happy to help you.
  • Prevent residue formation and stick-slip at low sliding speeds
    Good demulsifying behaviour towards water-miscible cooling lubricants
    Optimised coefficients of adhesion
    Good wetting and load-carrying capacity
  • Especially for slideways and guideways coated with plastic
  • Meet the requirements of CGLP oils acc. to DIN 51 502
Characteristics LAMORA D 68 LAMORA D 100 LAMORA D 150 LAMORA D 220
Article number 030142 030165 030166 030143
Density, DIN 51757, 20°C approx. 0.88 g/cm³ approx. 0.88 g/cm³ approx. 0.89 g/cm³ approx. 0.89 g/cm³
Flash point, DIN EN ISO 2592, Cleveland open cup ≥ 220 °C ≥ 220 °C ≥ 220 °C ≥ 220 °C
ISO viscosity grade, DIN ISO 3448, ISO VG 68 100 150 220
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 8.5 mm²/s approx. 11 mm²/s approx. 15 mm²/s  approx. 19 mm²/s
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 68 mm²/s approx. 100 mm²/s approx. 150 mm²/s approx. 220 mm²/s
Viscosity index, DIN ISO 2909 approx. 96 ≥ 89 ≥ 94 ≥ 90
Pour point, DIN ISO 3016 ≤ -20 °C ≤ -12 °C ≤ -10 °C ≤ -15 °C
FZG scuffing test, DIN ISO 14635-1, A / 8.3 / 90, failure load stage ≥ 12 ≥ 12 ≥ 12 ≥ 12
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 36 months 36 months 36 months

 

Konya Web Tasarım, Tuyan Tasarım ve Reklam Ajansı