ISOFLEX TOPAS NCA 5051

ISOFLEX TOPAS NCA 5051 is a beige-coloured synthetic long-term grease which is homogenous and short-fibred. It consists of a synthetic hydrocarbon oil and a special calcium soap.

ISOFLEX TOPAS NCA 5051 has a wide temperature range, is resistant to ageing and provides special corrosion protection. Its well-balanced texture and consistency ensures low and steady starting and running torques of the greased machine elements.

ISOFLEX TOPAS NCA 5051 protects the friction points sufficiently from corrosion and is also suitable for plastic/steel and plastic/plastic material combinations.

Synthetic long-term grease with a wide temperature range
Especially low starting and running torque
Lubricant film spreads particularly well
Good protection against wear
Good anticorrosion properties
Resistant to ageing

Characteristics	ISOFLEX TOPAS NCA 5051
Article number	004189
Colour space	beige
Texture	homogeneous , short fibrous
Service temperature, lower limit	-50 °C
Service temperature, upper limit	120 °C
Density, Klüber method: PN 024, 20°C	approx. 0.85 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	385 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	415 0.1 mm
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit	700 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit	1500 mPas
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 5.9 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 30 mm²/s
Copper corrosion, DIN 51811, 24 h, 120°C	1 - 120 - 24 corrosion degree
Water resistance, DIN 51807-1, 3 h, 90°C	≤ 1 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months

kluber-isoflex-topas-nca-5051.pdf

Owing to its good low-temperature characteristics, ISOFLEX TOPAS NCA 5051 is used in plain bearings in the automotive industry.
It is also used to solve lubrication problems in control elements of the fuel feed and ignition system. ISOFLEX TOPAS NCA 5051 reliably protects small adjustment gears against wear throughout their service life. It ensures constant and low breakaway torques.
The characteristics make ISOFLEX TOPAS NCA 5051 especially suitable for the lubrication of seals in pneumatic installations.

Ürünler

Anasayfa | Ürünler | ISOFLEX TOPAS NCA 5051

ISOFLEX TOPAS NCA 5051