Ürünler

Anasayfa | Ürünler | KLUBERBIO M 72-82

KLUBERBIO M 72-82

Klüberbio M 72-82 is a fully synthetic and ultimately biodegradable special grease classified in water pollution category 1. Its biodegradability acc. to OECD 301 F is > 60 % after 28 days.
Klüberbio M 72-82 is very resistant to water, protects against corrosion, shows a good load-carrying capacity and ageing resistance.

  • Klüberbio M 72-82 should be used wherever there is a risk of the lubricant contaminating the soil or water. It is therefore recommended for applications in water treatment plants, hydroelectric power plants, installations in ports, paper mills, etc., to lubricate rolling and plain bearings, chains, joints, open drives, ropes, racks and gear rims. It is also suitable for the lubrication of wood working machines, construction machines, agricultural and forestry equipment as well as truck chassis.
  • Klüberbio M 72-82 can also be used in water sports vehicles, bicycles, lawn mowers and similar outdoor equipment.
  • Ultimately biodegradable, therefore environment-friendly
  • Good adhesion and water resistance for long relubrication intervals
  • Good pressure-absorption capacity
  • Good pumpability through central lubrication systems over a wide temperature range
Characteristics Klüberbio M 72-82
Article number 009021
Colour space beige
Service temperature, lower limit -40 °C
Service temperature, upper limit 140 °C
Biodegradability, OECD 301 F, 28, within days ≥ 60 %
Density, Klüber method: PN 024, 20°C approx. 0.94 g/cm³
NLGI grade, DIN 51818 2
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 3000 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 5000 mPas
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 28 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 120 mm²/s
Dropping point, DIN ISO 2176 / IP 396 > 220 °C
Speed factor (n x dm) approx. 300000 mm/min
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months

 

Konya Web Tasarım, Tuyan Tasarım ve Reklam Ajansı