KLUBERSYNTH EM 94-102

Klübersynth EM 94-102 is a fully synthetic lubricating grease incorporating a special calcium complex soap thickener.

The thickener enables formation of a resilient lubricating filmproviding high resistance to mechanical-dynamic loads whilst enabling excellent wear protection.

Klübersynth EM 94-102 can be used in a multitude of applications under different climatic conditions due to its wide service temperature range. Various friction points can therefore be supplied with one single lubricant avoiding confusion with multiple lubricant selection and use.

With excellent resistance to water and good corrosion protection, Klübersynth EM 94-102 is especially suitable for use in wet and humid areas. Application examples include winter sport applications like ski lifts and piste vehicles, or industrial off shore and marine applications.
The excellent wear protection, adhesion characteristics, load capacity and low-temperature behaviour of Klübersynth EM 94-102 make it suitable for a multiplicity of application uses.

Excellent corrosion and wear protection for reduced maintenance requirements and longer component life.
Versatile multipurpose lubricant allowing product streamlining and reducing the risk of confusing lubricants.
Wide service temperature range for year-round lubrication under various climatic conditions.

Characteristics	Klübersynth EM 94-102
Article number	004305
Composition, thickener	calcium complex soap
Composition, type of oil	synthetic hydrocarbon oil
Colour space	brown
Texture	homogeneous
Functional lubricant film	approx. -40 °C
Service temperature, lower limit	-30 °C
Service temperature, upper limit	140 °C
Lubricating greases - K, DIN 51825@DIN 51502	KPHC2H-30
Density, Klüber method: PN 024, 20°C	approx. 0.91 g/cm³
NLGI grade, DIN 51818	2
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	265 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	295 0.1 mm
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹	≤ 7000 mPas
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 14.6 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 100 mm²/s
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	≤ 1 corrosion degree
Dropping point, DIN ISO 2176 / IP 396	≥ 250 °C
Four-ball tester, welding load, DIN 51350-4	≥ 3000 N
Speed factor (n x dm)	approx. 500000 mm/min
Water resistance, DIN 51807-1, 3 h, 90°C	0 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months

klubersynth-em-94-102.pdf

Ürünler

Anasayfa | Ürünler | KLUBERSYNTH EM 94-102

KLUBERSYNTH EM 94-102