KLUBERSYNTH J 44-402

Klübersynth J 44-402 consists of fully synthetic base oil, lithium soap and additives increasing the ageing resistance and the corrosion protection of steel surfaces. Special additives increase adhesion on steel and plastic components, improve the dampening effect between the friction bodies and reduce the breakaway and running torques in ball joints. Klübersynth J 44-402 has been designed to reduce slick-slip and to keep friction values and the difference between static and dynamic friction as low as possible. The usual seal materials like chlorobutadiene rubber (CR) were taken into consideration when developing the grease. Prior to series application we recommend testing the compatibility with the elastomers and plastics used.

Klübersynth J 44-402 is used for sealed joints in e.g. stabilizers, transverse links and wheel joints in the car industry. The grease has been tested in steel/POM pairings subject to oscillating tilting and slewing motions. Klübersynth J 44-402 was developed and tested in cooperation with renowned car manufacturers.
Klübersynth J 44-402 can be applied by brush, spatula, grease gun, automatic metering systems and central lubrication systems.

Low breakaway and running torques even after 24 hours of inoperative position

avoidance of cracking and stick-slip noise

Particularly low friction values

smooth running of joints even with high torsion

Good low-temperature behaviour

consistent smooth operation

Characteristics	Klübersynth J 44-402
Article number	004263
Composition, thickener	lithium soap
Composition, type of oil	synthetic hydrocarbon oil
Colour space	beige
Service temperature, lower limit	-40 °C
Service temperature, upper limit	130 °C
Density, Klüber method: PN 024, 20°C	approx. 0.9 g/cm³
NLGI grade, DIN 51818	2
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 360 mm²/s
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	≤ 1 corrosion degree
Flow pressure, DIN 51805-2, -40°C	≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396	≥ 185 °C
Water resistance, DIN 51807-1, 3 h, 90°C	1 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months

klubersynth-j-44-402.pdf

Ürünler

Anasayfa | Ürünler | KLUBERSYNTH J 44-402

KLUBERSYNTH J 44-402