HOTEMP 2000

HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.

HOTEMP 2000 is resistant to temperatures and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.

Thermally stable, for use up to approx. 230 °C
Good adhesion to friction points, long-term lubricating effect and low consumption
Good creeping and penetration, hence lower consumption and easy application
Resistant to centrifuging, therefore reduced risk of environmental contamination
Insoluble in water, good wash-off resistance

Characteristics	HOTEMP 2000
Article number	002087
Composition, type of oil	ester oil , synthetic hydrocarbon oil
Appearance	clear
Colour space	green
Service temperature, lower limit	0 °C
Service temperature, upper limit	230 °C
Flash point, DIN EN ISO 2592, Cleveland open cup	≥ 230 °C
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 126 mm²/s
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 2000 mm²/s
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	60 months

HOTEMP 2000 is used for lubrication points subject to high thermal loads as are common in chains, slideways, gears, wire ropes, guideways or cams.
It is not washed off and penetrates well into chain joints and friction points.
HOTEMP 2000 is preferably used for temperatures up to approx. 230 °C. A durable, load-carrying lubricant film is attained even at these high temperatures.
HOTEMP 2000 can be applied manually by brush or automatically by drip feeders or a spray system.
Klüber will be pleased to provide information on suitable equipment. HOTEMP 2000 is also available as a spray (Art. No. 081133). When applied, HOTEMP 2000 forms a highly adhesive lubricant film that resists centrifuging and water wash-off.

Ürünler