KLUBERPEX RA 41-151

For you as a manufacturer of car interior components, the reduction of odorous emissions is becoming ever more of an issue. Lubricants supporting the optimum function of your components play an important role in this respect.

We have therefore optimised the olfactory characteristics of Klüberplex RA 41-151 and designed it to reduce friction and wear in plain bearings, guide rails, mechanisms and actuators made of plastic and/or metal.

Furthermore, some special factors should be considered when lubricating plastic components. Since metal and plastic show different behaviour in several decisive ways, any lubricant to be used with plastics has to be adjusted accordingly. Compared with metal, plastics are rather soft. Solid lubricants have a positive effect in many metal friction points; on plastic surfaces, by contrast, their effect may be non-existent or even detrimental. Klüber Lubrication developed Klüberplex RA 41-151, which is free of solid lubricants and offers good adhesion.

Sliding roof: guide rails, kinematics
Gear shift: selector gate and ball socket
HVAC: heating and ventilation control
Seat adjustment mechanisms: tracks and seat rails
Dashboard: switches and levers
Pedal box: plain bearings
Klüberplex RA 41-151 can be applied by brush, spatula, grease gun or automatic lubricant dispensers.

No undesirable smells - approval acc. to BMW GS907014 and VDA 270
Reliable detection of minimum grease quantities by UV indicator
Enables mechanical (haptic) damping and noise reduction
For use with several types of plastic and elastomer

Characteristics	Klüberplex RA 41-151
Article number	020365
Composition, thickener	lithium complex soap
Composition, type of oil	mineral oil , synthetic hydrocarbon oil
Colour space	beige
Odour, VDA 270, based on standard, 2 h, 100°C	≤ 3
Service temperature, lower limit	-50 °C
Service temperature, upper limit	130 °C
Density, Klüber method: PN 024, 20°C	approx. 0.85 g/cm³
UV control, wave length: 366 nm	according to reference
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	310 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	340 0.1 mm
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit	1800 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit	3000 mPas
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 18.5 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 150 mm²/s
Flow pressure, DIN 51805-2, -50°C	≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396	≥ 250 °C
Water resistance, DIN 51807-1, 3 h, 90°C	≤ 1 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months

kluberpex-ra-41-151.pdf

Ürünler

Anasayfa | Ürünler | KLUBERPEX RA 41-151

KLUBERPEX RA 41-151