Ürünler

Anasayfa | Ürünler | KLUBERPLUS S 06

KLUBERPLUS S 06

When joining or assembling rubber-elastic materials, it is particularly important that the components can be fitted perfectly without excessive force.

Ill-fitting or damaged surfaces are frequently the result of less than optimal assembly lubrication, e.g. by mineral-oil-based products, soap solutions, water or silicones. In the application, this may become apparent in the form of corrosion, poor compatibility, impaired wetting of elastomers or residues.

As products matching precisely these applications we developed Klüberplus S 06-100, -100 M2, and -100 M4. During assembly, these products generate a temporary lubricating effect that makes the components fit into each other smoothly. As assembly forces are evidently up to 75 % lower, the amount of reject can be reduced and the production rate increased. As the water evaporates, the product ceases to act as a lubricant, so the component is fixed firmly in place. Klüberplus S 06-100, -100 M2 and -100 M4 offer you a wide variety of uses as they are neutral towards most customary materials.

The Klüberplus S 06 series is available in three ready-to-use viscosity variants. Owing to the gel-like texture of Klüberplus S 06-100, this product adheres well to the assembled component, so overhead application is easily possible with the workplace remaining clean. Klüberplus S 06-100 M2 and 100 M4 are ready-to-use emulsions with a lower viscosity. They are therefore preferably used for immersion or spray application, or generally in applications where a lower viscosity is required.

The Klüberplus S 06 series was developed to have a temporary lubricant for joining and assembly processes involving rubber-elastic materials and plastic components. The product concept has proven particularly successful in profiled seals, shaft seals, rubber sleeves and O-rings in the automotive industry. It may, however, also be used in many other industries and applications involving the joining and assembly of rubber-elastic components.

Application examples:

  • O-rings
  • Membranes, bushings
  • Radial shaft seals (RSS) on shafts and in casings
  • Cover caps (e.g. for gear shafts)
  • Profiled seals, e.g. for doors, windows, crankshaft casings
  • Stopper and fixing elements
  • Sealing elements, moulded rubber parts
  • Hoses (e.g. brake fluid, cooling fluid and fuel hoses)
  • Steering column boots
  • Bellows
  • Exhaust system hangers
  • Tyres
  • Headlamp/tail lamp and lighting assemblies as well as many other rubber or soft plastic parts


The Klüberplus S 06 series shows good stability and no tendency to separation even after prolonged storage. Stirring is therefore not required prior to use. The products' viscosity can be reduced by dilution with water. Once diluted, the product should be used up completely without delay. The Klüberplus S 06-100 series prevents during its application and upon complete evaporation of any water the immediate formation of rust / contact corrosion for a limited period of time. To prevent lime deposits on the component, we recommend using demineralised water.

  • Cost savings due to shorter assembly times and reduction of rejects due to lower assembly forces
  • Environmentally sound and safe to use
    Lower consumption of chemicals due to excellent temporary lubricating effect
    Non-flammable, water-based design - without solvent, mineral oil or silicones
    Prevents workplace injuries due to less force required for assembly
  • Neutral towards many materials, including EPDM, NBR, FKM, VMQ, ACM
Characteristics Klüberplus S 06-100 Klüberplus S 06- 100 M2 Klüberplus S 06- 100 M4
Article number 012102 012342 012343
Colour space white white white
Density, Klüber method: PN 024, 20°C approx. 1.00 g/cm³ approx. 1.00 g/cm³ approx. 1.00 g/cm³
pH-value, DIN ISO 976 approx. 8 approx. 8 approx. 8
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 1400 mm²/s approx. 75 mm²/s approx. 13 mm²/s
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months 24 months 24 months

 

Konya Web Tasarım, Tuyan Tasarım ve Reklam Ajansı