KLUBERSYNTH PEG 46

Klübersynth PEG 46 special greases are formulated from a polyglycol base oil and a lithium thickener, available in NLGI grades 00 and 1.

Klübersynth PEG 46 greases were developed especially for the lubrication of spur gears, bevel gears, planetary gears and worm gears with material pairings steel/steel or steel/brass in small enclosed gear drives. Klübersynth PEG 46 greases can also be used for the lubrication of ball and roller guides, rolling and plain bearings as well as toothed couplings.
Immersion lubrication of gears operating at circumferential speeds up to approx. 10 m/s is possible if NLGI grade 00 is used. Sufficient heat dissipation is essential. Depending on the operating conditions higher circumferential speeds are possible. The dynamic stresses of design elements made of aluminium or aluminium alloys may lead to increased wear. If necessary, wear tests should be carried out.

The good wear protection of both the gears and the rolling bearings ensures a long service life of the components
The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricating film even at elevated and high temperatures
Much longer service life than mineral oils due the excellent ageing und oxidation stability of the synthetic base oil used in Klübersynth
PEG 46 greases: Thus maintenance intervals can be extended and in certain cases even lifetime lubrication is possible
The excellent friction behaviour of the polyglycol base oil reduces power losses and improves efficiency

Characteristics	Klübersynth PEG 46-121	Klübersynth PEG 46-1200
Article number	027041	027042
Colour space	brown	brown
Texture	homogeneous	homogeneous
Service temperature, lower limit	-50 °C	-50 °C
Service temperature, upper limit	120 °C	120 °C
Density, Klüber method: PN 024, 20°C	approx. 0.98 g/cm³	approx. 0.99 g/cm³
NLGI grade, DIN 51818	1	00
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	310 0.1 mm	400 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	340 0.1 mm	430 0.1 mm
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 20 mm²/s	approx. 20 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 120 mm²/s	approx. 120 mm²/s
Copper corrosion, DIN 51811, 24 h, 100°C	1 - 100 - 24 corrosion degree	1 - 100 - 24 corrosion degree
Dropping point, DIN ISO 2176 / IP 396	≥ 180 °C	≥ 160 °C
FZG scuffing test, DIN ISO 14635-3, based on standard, A / 2.8 / 50, failure load stage	> 12	> 12
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months	24 months

Ürünler