UNISILKON L 641

UNISILKON L 641 is a special lubricating grease based on silicone oil and PTFE for valves and other elements in the heating, beverage and sanitary sector. UNISILKON L 641 offers good penetration ability in small lubrication gaps and lube points of difficult access. As its viscosity is rather independent from service temperatures, UNISILKON L 641 allows constant actuating forces within the whole cold/hot water range of single-lever mixer taps. Due to its chemical composition, UNISILKON L 641 has shown to be resistant to various substances in the food-processing and beverage industries like beer, milk, juices, liquors, acid and alkaline disinfectants. UNISILKON L 641 is not compatible with most organic solvents as well as acid and alkaline solutions.

UNISILKON L 641 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the foodprocessing, cosmetics, pharmaceutical or animal feed industries. The use of UNISILKON L 641 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

UNISILKON L 641 is used as sealing and assembly aid for seals and packings in contact with water or water vapour, e.g.: domestic installations - ball valves; single-lever mixers – piston cartouches, ceramic discs; mixer taps with two handles – swivel spouts, shower switches, shower heads; thermostatic mixer taps – thermo regulators and elements; heating – thermostatic valves, tap cocks, pressfit seals; water hydraulics – sealing grease for radial shaft seals.
UNISILKON L 641 is neutral towards most metals, thermoplastics and elastomers. Owing to the many different elastomer and plastic compositions their compatibility should be checked prior to series applications. UNISILKON L 641 can be applied by means of spatula, brush, usual metering devices or the tampon printing method. Please observe the material safety data sheet.

Excellent wetting power
Operational smoothness due to a good viscosity-temperature behaviour
Very good resistance to water and water vapour
High thermal stability
Good sealing effect
Neutral towards metals, many elastomers and plastics
NSF H1 registered
Tested acc. to BWGL-KTW (UBA guideline), WRAS, ACS and NSF/ANSI/CAN 61 as well as DIN-DVGW-type examination certificate acc. to DIN EN 377 class E (…160 °C) as lubricant for application in equipment and actuators for fuel gases

Characteristics	UNISILKON L 641
Article number	022121
Composition, solid lubricant	PTFE
Composition, type of oil	methyl silicone oil
Colour space	white
Texture	homogeneous , long fibrous
Service temperature, lower limit	-40 °C
Service temperature, upper limit	160 °C
NSF H1 registration number	056400
Density, Klüber method: PN 024, 20°C	approx. 1.18 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	300 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	320 0.1 mm
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 50 s⁻¹, lower limit	approx. 135000 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 50 s⁻¹, upper limit	approx. 205000 mPas
Dropping point, DIN ISO 2176 / IP 396	≥ 230 °C
Water resistance, DIN 51807-1, 3 h, 90°C	≤ 1 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months

kluber-unisilkon-l-641.pdf

Ürünler

Anasayfa | Ürünler | UNISILKON L 641

UNISILKON L 641