UNISILKON TK M

UNISILKON TK M 1011 and UNISILKON TK M 1012 are lubricating, sliding and sealing agents based on silicone oil. They offer high thermal stability, are insoluble in water and resistant to many ambient media.

UNISILKON TK M 1011 can be used as lubricating, sliding and sealing agent for all types of gas burning installations including their accessory parts which are in contact with fuel gas, e.g. valves, taper plug valves, ball valves in cookers and heaters.

Lubricant for sealing elements, to increase sliding capacity and reduce abrasion e.g. in plastics taps
Press-in and mounting aid for O-rings, packings
Sliding and sealing paste e.g. for ground-glass and taps in laboratories of the chemical industry
Insulating agent for high dielectric breakdown strength in substations and switching stations to prevent arcing

Clean and degrease surfaces. Apply a thin layer to the entire surface by means of brush, spatula or cloth which does not fray.

High thermal stability
Good resistance to low temperatures
Resistant to ambient media
Good water resistance

Characteristics	UNISILKON TK M 1011	UNISILKON TK M 1012
Article number	022089	022090
Composition, thickener	silicate	silicate
Composition, type of oil	silicone oil	silicone oil
Appearance	transparent	transparent
Colour space	white	white
Service temperature, lower limit	-40 °C	-40 °C
Service temperature, upper limit	160 °C	160 °C
Density, Klüber method: PN 024, 20°C	approx. 1.05 g/cm³	approx. 1.05 g/cm³
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit	15000 mPas	20000 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit	22000 mPas	46000 mPas
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months	12 months

kluber-unisilkon-tk-m.pdf

Ürünler

Anasayfa | Ürünler | UNISILKON TK M

UNISILKON TK M