CONSTANT GL 2000

CONSTANT GL 2000 is an impregnating fluid based on mineral oil for the lubrication of sintered metal plain bearings subject to high and low temperatures, speeds (e.g. <0.3 m/s, >5 m/s) and loads (e.g. <0.15 N/mm², >3 N/mm²). Due to the special product formulation and additives it covers a wide range of applications. Its soap content provides low-noise properties and good wear protection. CONSTANT GL 2000 can also be used for the lifetime lubrication of sintered metal plain bearings, also at stop and go.

CONSTANT GL 2000 is intended for use in sintered metal plain bearings in precision, automotive and electrical engineering as well as household applicances.
CONSTANT GL 2000 is applied in a vacuum immersion process to fill the pores of sintered metal plain bearings. We recommend to stir the immersion bath prior to immersion. Avoid filtering though very fine mesh size. To extend the service life of the bearings, an additional ready-to-use lubricant, MIKROZELLA G8 OY K can be applied around the bearing as a plastic oil reservoir by means of conventional fully automatic metering systems. We recommend checking application by the metering system under practical conditions prior to series application.

Low noise and smooth running
Longer bearing life due to good oxidation resistance
Energy savings and improved efficiency due to low frictional torque
Improved ageing stability owing to less internally generated heat at high speeds
Lifetime lubrication with high reliability; maintenance-free solution

Characteristics	CONSTANT GL 2000
Article number	028048
Composition, thickener	lithium soap
Composition, type of oil	mineral oil
Colour space	brown
Texture	homogeneous , viscous
Service temperature, lower limit	-10 °C
Service temperature, upper limit	100 °C
Density, DIN 51757, 20°C	approx. 0.88 g/cm³
Refractive index, DIN 51423-2 / ASTM 1218, 20°C	approx. 1.479
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 7 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 46 mm²/s
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx	12 months

kluber-constant-gl-2000.pdf

Ürünler

Anasayfa | Ürünler | CONSTANT GL 2000

CONSTANT GL 2000