SUMMIT PGS

Klüber Summit PGS compressor oils are based on polyalkylene glycols and special additives. In high-pressure piston compressors for natural gas or hydrocarbon process gas, mineral oils are easily absorbed into, and diluted by, the gas stream. By contrast, Klüber Summit PGS compressor oils are extremely resistant to such effects. The extremely high viscosity index of Klüber Summit PGS compressor oils 68 …, 150 ensures good lubrication in a wide range of temperatures.

Klüber Summit PGS compressor oils are suitable for piston, screwtype and rotary vane compressors for natural or process gas.
Klüber Summit PGS-2 is ideal for hydrocarbon gases of densities greater than 1.5 g/cm³ because this product is extremely resistant to dilution and absorption by hydrocarbon gases. Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representative for specific viscosity recommendations.
Drain as much of the old compressor oil from the system as possible, making sure that the oil is drained while still warm. Do not forget to drain coolers, separator tanks and all lines. Next, clean or preferably change the filters.
Then recharge with the appropriate Klüber Summit PGS compressor oil.
We recommend attaching a label indicating the type and filling date of the lubricant to the filter or the compressor cover.

For the lubrication of piston, screw-type and rotary vane compressors for natural and process gas
Compared with mineral oils, extremely resistant to dilution and absorption by hydrocarbon gases
Klüber Summit PGS-2 is ideal for heavy gases (densities > 1.5 g/cm³)

Characteristics	Klüber Summit PGS 2	Klüber Summit PGS 68	Klüber Summit PGS 100	Klüber Summit PGS 150
Article number	050026	050027	050028	050029
Colour space	yellow	yellow	yellow	yellow
Density, DIN 51757, 20°C	approx. 1.15 g/cm³	approx. 1.04 g/cm³	approx. 1.05 g/cm³	approx. 1.06 g/cm³
Flash point, DIN EN ISO 2592, Cleveland open cup	approx. 240 °C	≥ 230 °C	≥ 230 °C	≥ 240 °C
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 11.4 mm²/s	approx. 14 mm²/s	approx. 19.6 mm²/s	approx. 26.9 mm²/s
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 87 mm²/s	approx. 68 mm²/s	approx. 100 mm²/s	approx. 150 mm²/s
Viscosity index, DIN ISO 2909	≥ 111	≥ 200	≥ 200	≥ 200
Pour point, DIN ISO 3016	≤ -30 °C	≤ -42 °C	≤ -39 °C	≤ -36 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months	36 months	36 months	36 months

kluber-summit-pgs.pdf

Ürünler

Anasayfa | Ürünler | SUMMIT PGS

SUMMIT PGS