MOLYBKOMBIN UMF Spray is a high-temperature oil for temperatures between –10 and 180°C. Above 180°C an efficient dry lubricating film forms after evaporation of the carrier oil.
MOLYBKOMBIN UMF SPRAY
- MOLYBKOMBIN UMF Spray is used for highly loaded lubricating points such as chains, threaded spindles, bolts, screw connections and slideways, as well as for bearings subject to oscillation, high loads or surface pressure.
- Shake MOLYBKOMBIN UMF Spray well before use. Provide for adequate ventilation as explosive mixtures may form. Do not spray on a naked flame or any incandescent material. Please also refer to safety data sheet and can label. MOLYBKOMBIN UMF Spray forms a soft, oil-like layer which becomes dry when exposed to high temperatures. Protect product against direct sunlight and temperatures above 50°C.
| Characteristics | MOLYBKOMBIN UMF Spray |
| Article number | 081001 |
| Composition, propellant | propane-butane |
| Composition, solid lubricant | molybdenum disulphide |
| Composition, solvent | hydrocarbon |
| Composition, type of oil | polyalkylenglyco |
| Colour space | black |
| Service temperature, lower limit | -10 °C |
| Service temperature, upper limit | 450 °C |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C | approx. 40 mm²/s |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 350 mm²/s |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 24 months |
- Long relubrication intervals for hard-to-reach lube points
- Improved running-in
- Protection against seizure and wear
- Non-destructive disassembly of screws or joining elements
Copyright © 2021 Petrotech Endüstriyel ve Madeni Yağlar - Konya | Tüm Hakları Saklıdır.
