WOLFRACO WF 52 is lubricant for hot forming of brass and aluminum. It consists of mineral oil and synthetic hydrocarbon oil and is free from solid lubricants.
WOLFRACO WF 52
WOLFRACO WF 52 is used for hollow and solid pressing of brass and aluminum parts with an individual weight of 100 to 4,000 grams, e.g.
- valves and fittings (brass)
- synchronization rings with internal and external gears (brass)
- wheel suspensions, suspension arms (aluminum)
- small garnishes for the furniture industry (brass and aluminum)
WOLFACO WF 52 reduces friction between the die and the formed part even at die temperatures above 300°C. The lubricant film improves the material flowing properties particularly under extreme conditions ensuring the formation of a smooth material surface finish.
WOLFRACO WF 52 is a ready-to-use product which is applied to the die by spraying or by brush. It does not ignite at common die temperatures. There is very little smoke and residue formation in the die, i.e. press contamination is therefore reduced to a minimum. Stir well before use.
- Good flowing properties of pressed parts
- Smooth surface finish
- Low smoke formation
- Low degree of contamination
- Easy cleaning of tools
- Long tool life
- Economical application
| Characteristics | WOLFRACO WF 52 |
| Article number | 042128 |
| Composition, type of oil | mineral oil , synthetic hydrocarbon oil |
| Appearance | turbid |
| Colour space | yellow |
| Texture | liquid |
| Density, DIN 51757, 20°C | approx. 0.92 g/cm³ |
| Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C, lower limit | 39 mm²/s |
| Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C, upper limit | 44 mm²/s |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx | 24 months |
Copyright © 2021 Petrotech Endüstriyel ve Madeni Yağlar - Konya | Tüm Hakları Saklıdır.
