WOLFRAKOTE TOP PASTE

WOLFRAKOTE TOP PASTE is a grey high-temperature paste based on high-quality hydrocarbon oils and temperature-resistant solid lubricants.

At “normal temperatures” WOLFRAKOTE TOP PASTE is an efficient high-pressure lubricating and assembly paste showing high adhesive strength on metals. At permanently high temperatures the solid lubricants contained in WOLFRAKOTE TOP PASTE remain in the friction contact area and counteract adhesive wear due to seizing or material transfer

WOLFRAKOTE TOP PASTE has proven effective for the initial lubrication of chains at high temperatures. It can also be used for the lubrication of screws, bolts and hinges exposed to extreme temperatures.
In casting of nonferrous metals WOLFRAKOTE TOP PASTE is used as a heat-activated dressing for pouring ladles, dies, mould gates and runners.
WOLFRAKOTE TOP PASTE is also suitable as a separating and assembly paste for die sets, ejectors, sliding cores and as a separating paste for electric heating cartridges in hot chamber casting machines.
WOLFRAKOTE TOP PASTE adheres best in pre-cleaned surfaces which are free of grease, residues or separating layers formed by anticorrosion agents. After cleaning, a thin layer of WOLFRAKOTE TOP PASTE can be applied evenly across the entire surface using a medium hard, non-hair-shedding brush, leather cloth or plastic sponge.
Using the brush attached to the can lid helps protect the product from being contaminated, e.g. with other products. If required, the brush can be screwed off easily. WOLFRAKOTE TOP PASTE containers should be kept closed at all times to protect the product from contamination.

Reliable dry lubrication at high to extreme temperatures
Prevents seizure of e.g. bolts and hinges
Tried-and-tested long-term ladle dressing during casting of nonferrous metals

Characteristics	WOLFRAKOTE TOP PASTE
Article number	089003
Colour space	grey
Service temperature, lower limit	-25 °C
Service temperature, upper limit	1000 °C
Density, Klüber method: PN 024, 20°C	approx. 1.3 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	300 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	330 0.1 mm
Flow pressure, DIN 51805-2, -25°C	≤ 1000 mbar
Four-ball tester, welding load, DIN 51350-4	≥ 3600 N
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	12 months

kluber-wolfrakote-top-paste.pdf

Ürünler

Anasayfa | Ürünler | WOLFRAKOTE TOP PASTE

WOLFRAKOTE TOP PASTE