Ürünler

Anasayfa | Ürünler | VAN GOGH EP 46

VAN GOGH EP 46

Q8 van Gogh EP 46 is a high performance turbine oil based on selected premium base fluids. This product is developed for use in steam and gas turbines as well as combined cycle applications, including geared turbines. Q8 van Gogh EP 46 meet the challenges of the latest generation turbines making it suitable to operate under mild to severe conditions. Designed as part of the Q8Oils clean technology program to ensure superior varnish/deposit control and good load carrying capabilities in combination with long oil life.

  • Industrial steam- and gas turbines, including geared turbines and combined cycle operations Hydroelectric turbines Circulation systems where turbine oil quality is required Centrifugal- and axial pumps, turbo-compressors, gas booster compressors (GBC) where turbine oil quality is recommended
  • Turbine performance Long trouble free service life, excellent turbine protection and outstanding resistance against ageing
  • Enhanced technology Developed with outstanding anti-wear/extreme pressure protection to meet the load carrying requirements of geared turbines
  • Lower operational costs Specifically developed with excellent protection against the formation of varnish
Properties Method Unit Typical
Density, 15 °C D 4052 g/ml 0,875
Kinematic Viscosity, 40 °C D 445 mm²/s 46.0
Kinematic Viscosity, 100 °C D 445 mm²/s 7
Viscosity Index D 2270  - 109
Total Acid Number D 974 mg KOH/g 0.13
Oxidation Characteristics (TOST) D 943 hrs > 10.000
Modified Oxidation Stability (RPVOT) D 2272 % 95
Oxidation Stability (RPVOT) D 2272 min > 1.000
Foam, 5 min blowing, seq. 1-2-3 D 892 ml 10/10/10
Foam, 10 min settling, seq. 1-2-3 D 892 ml 0/0/0
Oxide Ash D 482 % mass < 0.001
Zinc content D 4951 mg-kg < 5
Pour Point D 97 °C -12
Flash Point, COC D 92 °C 222
Colour D 1500  - L 1.0
Air Release, 50 °C D 3427 min 4
Emulsion, Distilled Water, 54.4 °C D 1401  - 40/40/0 (10 )
Rust Test, Proc. A and B, 24 h D 665  - pass
Copper Strip, 3 h, 100 °C D 130  - 1
FZG Test, A/8.3/90 DIN 51354 load stage 10
Four Ball Wear, 392 N, 75 °C, 1200 rpm D 4172 mm 0.35 - 0.5

*The figures above are not a specification. They are typical figures obtained within production tolerances.

Konya Web Tasarım, Tuyan Tasarım ve Reklam Ajansı